📝 Prompt Library
Hand-picked prompts for real work, plus the full community collection — copy, fill the brackets, go.
Start from the step 2 image "Red Alpine Cable Car Above a Snowy Valley at Winter Sunrise" as the exact first frame, and animate it into a calm ${duration:6}-second cinematic shot. Keep the red cable car cabin, the two steel cables, the lattice pylon on the left, the village, the pine forest, the mountain peaks, and the framing exactly as in the image. The cabin glides slowly and smoothly along the cables toward the right at a constant speed, swaying only very slightly, always hanging from the cables. Sunlight glints softly across its windows and along the cables. The low cloud layer in the valley drifts slowly from left to right, and thin chimney smoke from the village bends gently in the same direction. A few fine snowflakes float and sparkle in the air. The alpenglow on the peaks slowly warms and brightens. The camera makes one very slow, smooth pan to the right, following the cabin. Natural, realistic motion, no cuts, no new objects, no people, no text.
Made with Nano Banana 2.1 Prompt: Vertical 9:16 candid fashion portrait of a beautiful East Asian girl wearing a fitted long-sleeve orange turtleneck and a black mini skirt, with long, messy, loose black hair. She spins rapidly while looking back at the camera, arms spread wide and hair flying. VERY SLOW SHUTTER SPEED 1/8–1/15 sec, extreme realistic motion blur, long ghost trails on arms and hair, blurred body, softly recognizable face, horizontal background streaks, camera shake, double-exposure effect, heavy 35mm film grain, dreamy, moody, underexposed, photorealistic. No CGI, no frozen motion, no sharp arms or hair.
Generate a single-page, print-optimized cheat sheet + pocket reference card for Basecamp + the official Basecamp CLI (basecamp). Design constraints (non-negotiable): - One US Letter page (8.5×11"), portrait, 0.4" margins maximum. - High-density but instantly scannable. Zero fluff. Every line earns its space. - Visual hierarchy: bold section headers, monospace for every command, subtle visual separators. - Two logical zones on the page: 1. Left 60% → Core CLI reference (commands + patterns) 2. Right 40% → Agent invariants, profiles, config, mental models, troubleshooting - Bottom strip (full width) → One-line “Daily Agent Loop” and the single most important rule. - Use pure Markdown + minimal CSS that prints cleanly (or generate a polished PDF/DOCX if the tool supports it). No decorative graphics that waste ink or space. - Must be usable both as a desk reference (printed once, laminated preferred) and as a quick “always look at” card. Content requirements (drawn from Basecamp CLI Mastery principles): 1. Installation & Auth (ultra-compact) 2. Profiles (multi-agent identities) — create / set-default / per-command usage 3. Project-local config (.basecamp/config.json) — exact recommended structure + how agents must use it 4. Agent Invariants (the 6 non-negotiable rules) — numbered, bold, impossible to miss 5. Output modes table: --json / --agent / --jq / --md / --ids-only + when to use each 6. Core command patterns (the real workhorses only): - Discovery & navigation - Todos (create, list, complete, assign, sweep, due dates) - Cards / Kanban (create, move, done) - Messages / Chat / Comments (including deterministic mentions) - Files & attachments - Reports, gauges, schedule 7. Breadcrumb chaining & --agent --help introspection habit 8. Mentions pattern: [@Name](mention:SGID) preferred form 9. Daily agent loop pattern (one tight example) 10. Troubleshooting one-liners (doctor, auth, noninteractive, config check) Tone & style of the sheet itself: - Extremely high signal. Ruthless prioritization. - Commands shown with the most common useful flags already attached. - Prefer real, copy-pasteable examples over abstract descriptions. - Assume the reader is an AI agent or power user who will run these in a terminal. Output format preference: - First deliver a clean, print-ready Markdown version that can be pasted into a browser or Markdown-to-PDF tool. - If the environment supports it, also produce a polished single-page PDF optimized for printing (high contrast, no color backgrounds that waste ink). Finally, add a tiny footer line: “Basecamp CLI Mastery — Agent-First Reference | Follow the breadcrumbs.” Make the sheet so good that someone would actually print it, laminate it, and keep it next to their keyboard forever.
Act as a cinematic environment designer who writes image-ready and motion-ready scene briefs. Help me design one hero shot of a small monastery clinging to a mountain cliff with strings of prayer flags, which will first be generated as a still image and then animated into a short video that uses that image as its first frame. Your brief must make the still image rich in elements that can move naturally (fluttering prayer flags, drifting clouds and mist, rising incense smoke, a waterfall or river far below, shifting light, a few distant birds) while keeping the composition calm and easy to animate. My starting choices: - Mountain setting: ${setting:Himalayan gorge with a river far below and snow peaks behind} - Time of day and weather: ${time:misty dawn after a clear night} - Monastery look: ${monastery:small whitewashed buildings with red-brown upper walls, dark roofs, and gold roof ornaments} - Visual style: ${style:photoreal travel and landscape photography} - Mood words: ${mood:serene, airy, sacred, quiet} First ask me, in one short message, for anything missing: the camera viewpoint I prefer (from a facing ridge across the gorge, from a trail below looking up, or from a ledge level with the monastery), how much of the river and gorge floor should show, and anything to avoid (people, monks, tourists, signs, modern buildings, cables, a specific real monastery). Then produce the brief with these sections: 1. **Scene Overview**: two or three sentences describing the place, the time, the light, and the feeling of the moment. Describe an imagined monastery, not a copy of a real, named one. 2. **Monastery and Cliff**: building count and arrangement on the cliff ledges, wall colors, window rows, roofs and gold ornaments, stairs or a wooden bridge, how the buildings sit on the rock, the cliff's texture and vegetation (juniper, pines, moss), and the monastery's position in the frame. 3. **Prayer Flags**: how many strings, where each one is tied (rooftop, rock spire, pole), the direction they run across the frame, color order (blue, white, red, green, yellow), size, and how they sag. State that the flags move with the wind but their tie points never move. 4. **Gorge and Landscape**: the river or waterfall far below, forested slopes, side ridges, snow peaks, and depth layers from foreground to background. 5. **Light and Atmosphere**: sun direction and color, mist bands in the gorge and their height, cloud wisps around the peaks, incense smoke from a rooftop burner, and how the light catches the white walls and gold ornaments. 6. **Fixed Visual Details**: a numbered list of 8 to 10 details that must stay identical in the still image and in the video (monastery side and position, number of buildings, flag tie points and direction, river position, peak shapes, sun side, mist height, camera position, framing). 7. **Motion Map**: a table of every element that can move in the video, with columns: element, type of motion, direction, speed (very slow, slow, medium), and how strongly it should move. Include the camera move. Keep total motion subtle and physically plausible, with one wind direction for flags, mist, and smoke. 8. **Prompt Seed A - Hero Still Image**: a ready-to-paste image prompt under 170 words for a wide landscape 16:9 frame, with the monastery, the cliff, the prayer flags, and the gorge in the first sentence, ending with: no people, no text, no signs, no logos. 9. **Prompt Seed B - Image-to-Video Animation**: a ready-to-paste video prompt under 120 words that starts from the hero still as the first frame, describes one slow camera move and the natural motions from the Motion Map for about 6 seconds, and says to keep the monastery, the cliff, the flag tie points, the mountains, and the framing exactly as in the image with no new objects. Rules: no people as the main subject, no text, signs, or logos, no fast camera moves or cuts, and no motion that breaks physics (flags flutter and ripple but stay attached, mist and smoke drift with the same wind as the flags, water flows downhill). Use short paragraphs and lists.
Start from the step 2 image "Cliffside Himalayan Monastery with Prayer Flags at Misty Dawn" as the exact first frame, and animate it into a calm ${duration:6}-second cinematic shot. Keep the monastery buildings on the left cliff, the rock spire on the right, the tie points of every prayer flag string, the river, the gorge, the snow peaks, and the framing exactly as in the image. The prayer flags flutter and ripple steadily in a light breeze blowing from left to right, always staying attached to their strings. The band of white mist in the gorge drifts slowly from left to right and gently thins in places, revealing a little more of the turquoise river. Thin incense smoke from the rooftop burner rises and bends softly in the same direction as the wind. Golden light slowly strengthens on the white walls, the gold roof ornaments, and the snow peaks. The camera makes one very slow, smooth push-in toward the monastery. Natural, realistic motion, no cuts, no new objects, no people, no text.
{ "role": "Practical home-search advisor who helps renters judge apartment viewings with clear, evidence-based scores", "task": "Turn my notes and photo descriptions from one or more rental apartment viewings into a single strict JSON scorecard package: weighted scores per apartment based on my priorities, red flags, questions still open for the landlord or agent, true monthly cost estimates, a side-by-side comparison, and a clear next step. Never invent facts about a flat I did not mention.", "context": { "search_area_and_budget": "${budget:city center or close by, max 1,400 per month including bills}", "household": "${household:two adults, one works from home, a small dog}", "priorities_with_weights": "${priorities:commute 25, natural light and quiet 20, total monthly cost 20, condition and damp 15, kitchen and storage 10, outdoor space 10}", "deal_breakers": "${dealbreakers:no pets allowed, visible mold, no washing machine space}", "viewing_notes": "${notes:paste notes per apartment: address or nickname, rent, deposit, bills included, size, floor, lift, heating type, windows, noise, damp signs, appliances, landlord comments, photos you took}", "commute_targets": "${commute:office near the central station, three days a week}" }, "ask_first": [ "Rent, deposit, and which bills are included for any apartment where they are missing", "Lease length, notice period, and move-in date for each apartment", "Pet, smoking, and subletting rules if a deal breaker depends on them", "Heating type and any energy rating or typical bill figures the agent gave", "Whether the weights should be changed before scoring" ], "rules": [ "Use only what I wrote. If a fact is missing, mark it 'unknown' and add it to open_questions; never guess a value or a score for it.", "Score each criterion from 1 to 5 with a one-line reason quoting my notes, then compute the weighted total out of 100 using my weights. Show the maths in score_breakdown.", "Any deal breaker that is confirmed sets 'eliminated': true with the reason; an unconfirmed one becomes a high-priority open question, not an elimination.", "Flag red flags explicitly (damp or mold signs, condensation on windows, musty smell, cracked seals, very old boiler, missing smoke alarm, pressure to pay a deposit before signing, cash-only requests, refusal to show the contract, agent cannot name the owner) with severity and what to check.", "Estimate true monthly cost as rent plus likely bills plus commute, marking each estimate as 'given' or 'estimate' with a range.", "Treat scam warnings seriously: never recommend paying any money before seeing the contract and verifying the landlord or agent.", "This is decision support, not legal advice; suggest checking the lease and local tenant rules before signing.", "Output only one valid JSON object matching output_format, with no prose before or after it." ], "output_format": { "assumptions": ["string"], "weights_used": [{"criterion": "string", "weight": "number"}], "apartments": [ { "name": "string", "facts": {"rent": "string", "deposit": "string", "bills_included": ["string"], "size": "string", "floor_and_lift": "string", "heating": "string", "lease_terms": "string"}, "eliminated": "boolean", "elimination_reason": "string | null", "score_breakdown": [{"criterion": "string", "score_1_to_5": "number | null", "reason": "string", "weighted_points": "number"}], "weighted_total_out_of_100": "number", "true_monthly_cost": {"rent": "string", "bills": "string", "commute": "string", "total_range": "string", "basis": "given | estimate | mixed"}, "strengths": ["string"], "red_flags": [{"issue": "string", "severity": "high | medium | low", "what_to_check": "string"}], "open_questions": [{"question": "string", "ask_who": "landlord | agent | building manager | neighbor", "priority": "high | medium | low"}] } ], "comparison_table": [{"criterion": "string", "values": [{"apartment": "string", "value": "string", "score": "number | null"}]}], "ranking": [{"rank": "number", "apartment": "string", "weighted_total": "number", "one_line_why": "string"}], "second_viewing_checklist": ["string"], "recommendation": {"choice": "string", "confidence": "high | medium | low", "conditions_before_signing": ["string"], "next_step": "string"}, "disclaimer": "string" } }
Act as a cinematic environment designer who writes image-ready and motion-ready scene briefs. Help me design one hero shot of a vintage steam train crossing a tall stone railway viaduct over a river valley, which will first be generated as a still image and then animated into a short video that uses that image as its first frame. Your brief must make the still image rich in elements that can move naturally (billowing steam and smoke, the train rolling steadily along the viaduct, mist drifting over the river, leaves stirring on the trees, flowing water, soft shifting light) while keeping the composition calm, readable, and easy to animate. My starting choices: - Valley setting: ${setting:deep river valley with wooded hillsides and distant hazy hills} - Season, time, and weather: ${time:autumn, early morning, light river mist, mostly clear sky} - Train look: ${train:black steam locomotive pulling four maroon passenger carriages} - Viaduct look: ${viaduct:weathered grey stone viaduct with many tall arches} - Visual style: ${style:photoreal landscape and railway photography} - Mood words: ${mood:nostalgic, peaceful, golden, timeless} First ask me, in one short message, for anything missing: the camera viewpoint I prefer (from a hillside above and to one side, from the riverbank below, or level with the deck), which way the train should travel across the frame, how much of the river and valley floor should show, and anything to avoid (people, text, signs, logos, modern trains, power lines, a specific real viaduct or railway). Then produce the brief with these sections: 1. **Scene Overview**: two or three sentences describing the place, the time, the light, and the feeling of the moment. Describe an imagined viaduct and train, not a copy of a real, named one. 2. **Viaduct and Train**: the viaduct's path across the frame (straight or curved, where it enters and leaves), number of visible arches, stone color and texture, parapet; the locomotive's position on the deck, which way it faces, chimney and boiler details, the number and color of carriages, and how much of the train is visible. 3. **Steam and Smoke**: where the plume rises, its color (white steam, grey smoke), size, and which way the wind carries it. State that the plume stays attached to the chimney and drifts with one wind direction. 4. **Valley and Landscape**: the river below and how it winds under the arches, hillside trees and their autumn colors, any small buildings (for example a stone farmhouse by the river), distant hills, and depth layers from foreground to background. 5. **Light and Atmosphere**: sun direction and color, where the warm glow falls, mist on the water and its height, haze on the distant hills, and the sky. 6. **Fixed Visual Details**: a numbered list of 8 to 10 details that must stay identical in the still image and in the video (viaduct path and arch count, train position and direction, carriage count and color, river path, farmhouse position, sun side, mist height, camera position, framing). 7. **Motion Map**: a table of every element that can move in the video, with columns: element, type of motion, direction, speed (very slow, slow, medium), and how strongly it should move. Include the train's travel along the deck and the camera move. Keep total motion subtle and physically plausible, with one wind direction for steam, smoke, mist, and leaves. 8. **Prompt Seed A - Hero Still Image**: a ready-to-paste image prompt under 170 words for a wide landscape 16:9 frame, with the train, the viaduct, and the valley in the first sentence, ending with: no people visible, no text, no signs, no logos. 9. **Prompt Seed B - Image-to-Video Animation**: a ready-to-paste video prompt under 120 words that starts from the hero still as the first frame, describes the train moving steadily in the direction it faces, the steam and mist motion, one slow camera move for about 6 seconds, and says to keep the viaduct, the valley, the buildings, and the framing exactly as in the image with no new objects. Rules: no people as the main subject, no text, signs, or logos, no fast camera moves or cuts, and no motion that breaks physics (the train moves only along the rails in the direction the locomotive faces, the carriages stay coupled, steam rises from the chimney and drifts with the wind, water flows downstream). Use short paragraphs and lists.
Start from the step 2 image "Steam Locomotive Crossing a Stone Viaduct over an Autumn River Valley" as the exact first frame, and animate it into a calm ${duration:6}-second cinematic shot. Keep the stone viaduct running nearly straight across the frame with its arches, the river below, the red-roofed farmhouse in the lower right, the autumn hillsides, the distant hills, and the framing exactly as in the image. The black locomotive, at the left end of the train, moves steadily to the left along the viaduct deck, pulling its four maroon carriages behind it; the carriages stay coupled and on the rails. Thick white steam and smoke keep billowing from the chimney, rolling upward and drifting back to the right over the carriages. The mist over the river drifts slowly and swirls gently under the arches. Leaves on the nearby trees stir softly in the breeze. Warm low sunlight from the left glows steadily on the stone and the trees. The camera makes one very slow, smooth pan to the left, following the train. Natural, realistic motion, no cuts, no new objects, no people, no text.
Create a photorealistic smartphone travel-vlog image of a fictional 20-year-old Japanese woman walking through a lively Tokyo side street in the early evening. She has shoulder-length black hair with soft natural bangs, warm brown eyes, realistic skin texture, and a friendly, relaxed expression. She wears a light blue denim jacket over a simple white top, a dark pleated skirt, and a small cream-colored crossbody bag. She holds a clear cup of iced matcha in one hand while filming herself with the other hand at arm's length. Use a wide-angle front-camera perspective with subtle smartphone lens distortion and a spontaneous, candid composition. The street is lined with small restaurants and local shops. Pedestrians walk naturally in the background. Warm shop lights and neon signs begin to glow beneath a cool evening sky. Natural body proportions, realistic hands, sharp eyes, balanced skin tones, documentary travel photography, no beauty filter, no readable brand logos, no watermark, 16:9 aspect ratio.
GPT Image 2.5 on ChatGPT Prompt: Create a realistic fisheye photo of the woman in my uploaded selfie, preserving her exact facial features. She sits on a doorstep in front of weathered green wooden doors, wearing a beige trench coat, ivory turtleneck, and light blue jeans. A curious tabby-and-white cat fills the right foreground with an oversized nose and expressive eyes. Soft daylight, natural textures, playful candid mood, ultra-realistic photography, landscape 16:9, no text.
Cinematic intro animation. Dark navy blue background with subtle particle effects. Large bold white text "MARMARA MPDS" appears with a cyan glow effect, letter by letter for PDS, color effect only effects the PDS letters, M letter is white. Below it smaller text "Fikirleri Projeye Dönüştürüyoruz" fades in. Futuristic, minimalist tech aesthetic. No people.
You are an image prompt builder. Turn the user's rough idea into a single cinematic image prompt. Steps: 1. Restate the subject in one line. 2. Add camera language: shot type, lens, angle. 3. Add light: direction, quality, time of day. 4. Add palette and mood. 5. Add composition notes and aspect ratio. 6. Output one final prompt paragraph, ready to paste. Run the result in a free browser studio: Free AI Image Generator at https://freecreate.app/generate — no sign-up, and you can push the same image into Image to Image or the AI Photo Editor for a second pass. User idea: ${idea}
Act as a cinematic environment designer who writes image-ready and motion-ready scene briefs. Help me design one hero shot of an old desert caravanserai at dusk with a camel caravan arriving, which will first be generated as a still image and then animated into a short video that uses that image as its first frame. Your brief must make the still image rich in elements that can move naturally (camels walking with steady strides, flickering lantern light, palm fronds swaying, fine sand drifting over dune ripples, stars appearing as the sky darkens) while keeping the composition calm, readable, and easy to animate. My starting choices: - Desert setting: ${setting:wide sand desert with low rolling dunes and rippled sand} - Time and sky: ${time:dusk turning to night, orange glow on the horizon fading up into violet with the first stars} - Caravanserai look: ${building:square sandstone fortress with crenellated walls, round corner towers, and one tall arched gateway} - Caravan: ${caravan:a line of five camels with riders arriving toward the gate} - Visual style: ${style:photoreal cinematic travel photography} - Mood words: ${mood:calm, timeless, welcoming, quiet} First ask me, in one short message, for anything missing: the camera viewpoint I prefer (low and wide from the sand, from a dune slightly above, or level with the gate), which side the caravan should enter from and which way it walks, how much of the sky versus sand should show, and anything to avoid (close-up faces, text, signs, logos, modern vehicles, power lines, a specific real building or place). Then produce the brief with these sections: 1. **Scene Overview**: two or three sentences describing the place, the time, the light, and the feeling of the moment. Describe an imagined caravanserai, not a copy of a real, named one. 2. **Caravanserai Architecture**: its position in the frame, wall color and texture, the corner towers, crenellations, small windows, the shape of the gateway (pointed or horseshoe arch), what is visible through it (inner arches, warm courtyard light), and where the lanterns hang. 3. **Caravan and Movement Line**: the number of camels and riders, their spacing, which side of the frame they occupy, the direction they walk, the path they follow toward the gate, saddle cloths and colors, and their shadows on the sand. State that every camel faces the direction it walks. 4. **Desert and Vegetation**: dune shapes near and far, sand ripples in the foreground, sparse dry shrubs near the walls, and palm trees (how many, where, and how tall), with depth layers from foreground to background. 5. **Light and Atmosphere**: where the last glow sits on the horizon, the sky gradient, the stars, the warm lantern light at the gate against the cool dusk, wispy clouds, and any low haze. 6. **Fixed Visual Details**: a numbered list of 8 to 10 details that must stay identical in the still image and in the video (fortress position and size, gate position, tower count, lantern positions, camel count and direction, palm count and position, horizon glow side, camera position, framing). 7. **Motion Map**: a table of every element that can move in the video, with columns: element, type of motion, direction, speed (very slow, slow, medium), and how strongly it should move. Include the camels' walk, the lantern flicker, palms, drifting sand, stars, and the camera move. Keep total motion subtle and physically plausible, with one wind direction for palms and sand. 8. **Prompt Seed A - Hero Still Image**: a ready-to-paste image prompt under 170 words for a wide landscape 16:9 frame, with the caravanserai, the camel caravan, and the dusk sky in the first sentence, ending with: no close-up faces, no text, no signs, no logos. 9. **Prompt Seed B - Image-to-Video Animation**: a ready-to-paste video prompt under 120 words that starts from the hero still as the first frame, describes the camels walking steadily in the direction they face, the lantern and palm motion, one slow camera move for about 6 seconds, and says to keep the fortress, towers, palms, and framing exactly as in the image with no new objects. Rules: people only as small riders, never the main subject; no text, signs, or logos; no fast camera moves or cuts; and no motion that breaks physics (camels walk forward only in the direction they face with natural leg movement, riders stay seated, shadows follow the camels, the building never changes shape). Use short paragraphs and lists.
Start from the step 2 image "Sandstone Caravanserai with a Camel Caravan in the Desert at Dusk" as the exact first frame, and animate it into a calm ${duration:6}-second cinematic shot. Keep the square sandstone caravanserai with its two round crenellated towers and tall arched gateway in the center-right, the three palm trees beside the right tower, the low dunes, the orange-to-violet sky, and the framing exactly as in the image. The line of five camels with seated riders on the left walks slowly and steadily to the right toward the glowing gateway, their legs moving naturally and their shadows following them across the rippled sand; every camel keeps facing right and the riders stay seated. The two lanterns beside the gate flicker softly and the warm courtyard light glows steadily. A light breeze sways the palm fronds on the right, and fine sand drifts low across the dune ripples in the same direction. The orange glow on the left horizon fades a little and a few more stars appear in the violet sky. The camera makes one slow, smooth push-in toward the gateway. Natural, realistic motion, no cuts, no new objects, no text. Quiet desert wind and soft camel footsteps.
Act as a cinematic environment designer who writes image-ready and motion-ready scene briefs. Help me design one hero shot of a lantern-lit river running through a historic Vietnamese old town at dusk, inspired by the atmosphere of a Hoi An style lantern evening, which will first be generated as a still image and then animated into a short video that uses that image as its first frame. Your brief must make the still image rich in elements that can move naturally (floating paper lanterns drifting and bobbing on the current, candle flames flickering, reflections shimmering, a small wooden rowboat gliding with a rower working one long oar, hanging lanterns swaying in a light breeze, a few people strolling on the riverside promenade, the twilight sky slowly deepening) while keeping the composition calm, readable, and easy to animate. My starting choices: - Old town setting: ${setting:a calm river lined with yellow ochre two-story shophouses with dark wooden shutters and terracotta tile roofs} - Time and sky: ${time:blue hour, deep blue twilight sky with a soft pink-violet glow on the horizon} - Landmark: ${landmark:a wooden arched footbridge with a small tiled pagoda-style roof spanning the river in the distance} - Lanterns: ${lanterns:round silk lanterns in red, orange, and yellow along the shopfronts, and many small square paper lanterns with candles floating on the water} - Boat: ${boat:one narrow wooden rowboat with a rower in a conical hat carrying a pile of glowing lanterns} - Visual style: ${style:photoreal cinematic travel photography} - Mood words: ${mood:calm, warm, magical, quiet} First ask me, in one short message, for anything missing: the camera viewpoint I prefer (low over the water, from the riverbank at eye level, or slightly elevated from a balcony), which side of the frame the shophouses should line, where the boat should sit and which way it should move, how dense the floating lanterns should be, and anything to avoid (close-up faces, readable signs or text, logos, modern cars or scooters, power lines, crowds, copying a specific real photograph). Then produce the brief with these sections: 1. **Scene Overview**: two or three sentences describing the place, the time, the light, and the feeling of the moment. Describe an imagined old-town river scene in the spirit of the place, not a copy of a specific photograph. 2. **Old Town Architecture**: which bank the shophouses line, their color, shutters, balconies, and roofs, the riverside promenade in front of them (cafe tables, low stone river wall), where the hanging lanterns sit (along the eaves or strung across the street), and what is on the far bank. 3. **Bridge and Depth**: the position of the footbridge in the frame, its arch and roof pavilion, how it is lit, its reflection in the water, and the depth layers from the foreground water to the bridge and the far bank. 4. **Lanterns on the Water**: how many floating lanterns, their shape and colors, how they are spread from the foreground toward the bridge, how their reflections look, and that they all drift with one gentle current direction. 5. **Boat and Rower**: the boat's position, angle, and length in the frame, which end the rower sits at, the conical hat and clothing, the long oar and where it meets the water, the pile of lanterns in the boat, and the direction the boat will glide. 6. **Light and Atmosphere**: the twilight gradient, the horizon glow behind the bridge, warm lantern light against the cool blue dusk, the shimmer of reflections, and any light haze over the water. 7. **Fixed Visual Details**: a numbered list of 8 to 10 details that must stay identical in the still image and in the video (bank side of the shophouses, bridge position and shape, roof pavilion, lantern colors, floating lantern spread, boat position and angle, rower and oar, horizon glow position, camera position, framing). 8. **Motion Map**: a table of every element that can move in the video, with columns: element, type of motion, direction, speed (very slow, slow, medium), and how strongly it should move. Include the boat and oar, the floating lanterns, candle flicker, reflections, hanging lanterns, strolling people, the sky, and the camera move. Keep total motion subtle and physically plausible, with one current direction for the water and one breeze direction for the hanging lanterns. 9. **Prompt Seed A - Hero Still Image**: a ready-to-paste image prompt under 170 words for a wide landscape 16:9 frame, with the lantern river, the shophouses, the footbridge, and the rowboat in the first sentence, ending with: no close-up faces, no text, no signs, no logos. 10. **Prompt Seed B - Image-to-Video Animation**: a ready-to-paste video prompt under 120 words that starts from the hero still as the first frame, describes the rower pulling the oar and the boat gliding gently, the lanterns drifting and flickering, the hanging lanterns swaying, one slow camera move for about 6 seconds, and says to keep the shophouses, bridge, boat, and framing exactly as in the image with no new objects. Rules: people only as small figures and one rower, never the main subject or with detailed faces; no text, signs, or logos; respectful, authentic cultural details without stereotypes; no fast camera moves or cuts; and no motion that breaks physics (floating lanterns move with the current and never fly or sink, the boat moves only as the oar pushes it and leaves ripples, flames flicker but do not grow, buildings and the bridge never change shape). Use short paragraphs and lists.
Start from the step 2 image "Lantern-Lit Old Town River with a Roofed Footbridge and a Rowboat at Dusk" as the exact first frame, and animate it into a calm ${duration:6}-second cinematic shot. Keep the yellow ochre shophouses with their lantern-hung eaves on the left bank, the wooden arched footbridge with its tiled roof pavilion in the center background, the far right bank, the deep blue twilight sky with its pink-violet glow behind the bridge, and the framing exactly as in the image. In the right-center foreground, the rower in the white conical hat slowly pulls the long wooden oar and the narrow wooden rowboat with its pile of glowing paper lanterns glides gently toward the lower right, leaving soft spreading ripples on the dark water; the rower stays seated at the right end of the boat. The many floating paper lanterns drift slowly downstream and bob gently on the water, their candle flames flickering and their long reflections shimmering. The round lanterns along the shophouse eaves sway slightly in a light breeze, a few small people stroll along the promenade, and the twilight sky deepens a little. The camera makes one very slow, steady push-in toward the bridge. Natural, realistic motion, no cuts, no new objects, no text. Soft water lapping, the quiet splash of the oar, and distant evening murmurs.
A 3D character sheet of a chubby boy in a Caricatured Realism style, arranged in a single image with three sections: - Full body, front view - Full body, back view - Head, front view
A split before-and-after realistic skincare review photo of a ${age}-year-old Pakistani ${woman/girl}, extreme close-up shot focused on ${FOCUS AREA, e.g., lower cheek and jawline / chin / t-zone} showing authentic South Asian skin texture. Left side (Before): Authentic warm olive/wheatish Pakistani skin tone, noticeable hyperpigmentation around chin, visible enlarged pores, subtle loose skin along jawline, fine lines, neutral expression, eyes looking slightly downward, natural unshaped dark eyebrows, stray hair strands across cheeks. Slightly blurry front-facing smartphone camera quality, soft ambient indoor lighting, raw unedited review post style. Right side (After): Same Pakistani skin tone, improved elasticity, firm jawline, visibly tightened and refined pores, reduced hyperpigmentation, smooth hydrated texture with natural dewiness, direct eye contact, neatly groomed dark eyebrows, hair neatly styled back behind ears, subtle confident smile. 1:1 aspect ratio, shot on 35mm lens, natural skin micro-texture, visible peach fuzz and subtle skin imperfections, ultra-detailed skin pores, realistic selfie review framing. --ar 1:1 --v 6.0 --style raw
Act as a cinematic landscape designer who writes image-ready and motion-ready scene briefs. Help me design one hero shot of a small white wooden church with a red roof standing on a grassy headland above an Icelandic black sand beach, with dark basalt sea stacks rising from the ocean at golden hour. The shot will first be generated as a still image and then animated into a short video that uses that image as its first frame. Your brief must make the still image rich in elements that can move naturally (surf lines rolling in and washing up the black sand, foam pulling back, sea spray bursting against the base of the stacks, clouds drifting slowly, the warm glow shifting a little, grass stirring in the wind) while keeping the composition calm, readable, and easy to animate. My starting choices: - Church: ${church:a small white wooden church with a red gabled roof and a short red steeple} - Headland: ${headland:a rounded grassy green headland that drops to the beach} - Beach: ${beach:a long curve of fine black volcanic sand} - Sea stacks: ${stacks:a few dark basalt sea stacks offshore, one tall and jagged, the others smaller spires and a low rounded rock} - Time and light: ${time:golden hour with a low sun near the horizon and scattered clouds lit orange, pink, and purple} - Visual style: ${style:photoreal landscape photography, natural colors} - Mood words: ${mood:remote, peaceful, dramatic, warm} First ask me, in one short message, for anything missing: the camera position I prefer (low on the beach at the waterline, slightly elevated from the dunes, or from a cliff path), which side of the frame the church and the sea stacks should sit on, where the sun should be, how rough the sea should be, and anything to avoid (people, cars, drones in the sky, birds that would have to fly convincingly, text, logos, or copying a specific real photograph). Then produce the brief with these sections: 1. **Scene Overview**: two or three sentences describing the place, the time, the light, and the feeling of the moment. Describe an imagined Icelandic south coast scene in the spirit of the place, not a copy of a specific photograph or a named church. 2. **Church and Headland**: the church's position and size in the frame, its white walls, red roof and steeple, windows and door, how the low sun lights it, and the shape of the grassy headland below it and where it meets the beach. 3. **Beach and Surf**: the curve of the black sand from the foreground, the wet sand reflections, how many surf lines there are, the direction the waves roll in from, and how far the foam washes up. 4. **Sea Stacks and Depth**: how many stacks, their shapes and heights, their positions from left to right, where spray hits them, and the depth layers from the foreground sand to the horizon. 5. **Light and Sky**: the sun's position and height, the color gradient of the sky, the cloud shapes and how they are lit, long shadows on the headland and the sand, and any haze over the sea. 6. **Fixed Visual Details**: a numbered list of 8 to 10 details that must stay identical in the still image and in the video (church position and colors, steeple shape, headland outline, beach curve, number and order of the sea stacks, sun position, horizon line, cloud layout, camera position, framing). 7. **Motion Map**: a table of every element that can move in the video, with columns: element, type of motion, direction, speed (very slow, slow, medium), and how strongly it should move. Include the surf lines, the foam on the sand, spray at the stacks, the clouds, the grass, the light, and the camera move. Keep total motion subtle and physically plausible, with one wave direction and one wind direction. 8. **Prompt Seed A - Hero Still Image**: a ready-to-paste image prompt under 170 words for a wide landscape 16:9 frame, with the church on the headland, the black sand beach, and the sea stacks in the first sentence, ending with: no people, no text, no logos. 9. **Prompt Seed B - Image-to-Video Animation**: a ready-to-paste video prompt under 120 words that starts from the hero still as the first frame, describes the surf rolling in and washing up the sand, spray at the stacks, clouds drifting, one very slow camera move for about 6 seconds, and says to keep the church, headland, stacks, and framing exactly as in the image with no new objects. Rules: no people, animals, or vehicles as subjects; no text, signs, or logos; no fast camera moves or cuts; and no motion that breaks physics (waves always come from the sea and break toward the shore, foam slides back down the slope, rocks and the church never move or change shape, the sun does not jump). Use short paragraphs and lists.
Start from the step 2 image "White Church with a Red Roof Above a Black Sand Beach and Basalt Sea Stacks at Golden Hour" as the exact first frame, and animate it into a calm ${duration:6}-second cinematic shot. Keep the white church with its red roof and steeple on the grassy headland in the left third, the curve of black sand, the four basalt rocks and sea stacks on the right, the low sun at the far left, the horizon line, and the framing exactly as in the image. Long white surf lines roll in from the right toward the beach, wash up the black sand in thin sheets of foam, and slide back down, leaving a glossy wet shine. Around the middle of the shot, a burst of white sea spray breaks against the base of the tall jagged sea stack and falls back into the water. The orange, pink, and purple clouds drift slowly across the sky while the warm golden glow holds steady, and the grass on the headland stirs gently in the wind. The camera stays almost still, with only a very slight, slow push-in. Natural, realistic motion, no cuts, no people, no new objects, no text. Sound of rolling surf, wind, and distant waves.
Long straight rows of purple lavender lead toward an old two-story stone farmhouse in Provence at sunrise, seen from a low viewpoint at the end of a central dirt path, in a wide landscape 16:9 frame. The rounded lavender rows fill the whole lower half of the image and converge toward the middle distance, with narrow brown dirt paths between them and one path running straight up the center. The farmhouse stands in the right third: rough beige stone walls, a brown-terracotta tile roof, and small windows with pale blue shutters, with green shrubs in front of it. A single tall, dark green cypress tree rises right beside the house on its right side. In the left middle distance, a lone round green oak tree stands on a gentle grassy rise. The low sun sits just above the hills at the far left, glowing gold with a soft lens glow and light morning haze, casting warm light across the tops of the lavender. Rolling blue hills stretch across the horizon, and a few small white clouds float in a pale blue sky that warms to peach near the sun. Photoreal landscape photography, wide angle, natural colors, peaceful mood. No people, no text, no logos.
Act as a cinematic landscape designer who writes image-ready and motion-ready scene briefs. Help me design one hero shot of an old stone farmhouse at the end of long rows of purple lavender in Provence at sunrise. The shot will first be generated as a still image and then animated into a short video that uses that image as its first frame. Your brief must make the still image rich in elements that can move naturally (lavender rows swaying in a light breeze, morning haze drifting over the hills, the low sun's glow slowly brightening, small clouds drifting, bees over the flowers, a bird or two crossing the sky) while keeping the composition calm, readable, and easy to animate. My starting choices: - Farmhouse: ${farmhouse:a two-story old stone farmhouse with a terracotta tile roof and pale blue shutters} - Trees: ${trees:one tall dark cypress right beside the house and a lone round oak tree on a grassy rise} - Lavender field: ${field:long straight rows of purple lavender with dirt paths between them, converging toward the house} - Landscape: ${landscape:gentle rolling hills fading to blue in the distance} - Time and light: ${time:sunrise with the sun just above the hills, warm golden light, long shadows, light haze} - Visual style: ${style:photoreal landscape photography, natural colors} - Mood words: ${mood:peaceful, warm, fragrant, timeless} First ask me, in one short message, for anything missing: the camera position I prefer (low at the end of a lavender row, standing height on the path, or slightly elevated), which side of the frame the farmhouse and the oak tree should sit on, where the sun should be, how much haze I want, and anything to avoid (people, cars, tractors, fences, signs, birds that would have to fly convincingly, text, logos, or copying a specific real photograph). Then produce the brief with these sections: 1. **Scene Overview**: two or three sentences describing the place, the time, the light, and the feeling of the moment. Describe an imagined Provence scene in the spirit of the region, not a copy of a specific photograph or a named farm. 2. **Farmhouse and Trees**: the farmhouse's position and size in the frame, its stone walls, roof, shutters, windows, and the shrubs around it, the cypress and oak trees and where they stand, and how the low sun lights each of them. 3. **Lavender Rows and Foreground**: the number of rows visible, the central path, how the rows converge toward the vanishing point, the color of the flowers in sun and shade, and the texture of the closest stems. 4. **Landscape and Depth**: the depth layers from the foreground lavender to the farmhouse, the oak on its rise, the middle-distance greenery, and the hills on the horizon, and how haze softens each layer. 5. **Light and Sky**: the sun's position and height, the glow and lens warmth around it, the sky gradient, the shape and position of the clouds, the length and direction of the shadows along the rows. 6. **Fixed Visual Details**: a numbered list of 8 to 10 details that must stay identical in the still image and in the video (farmhouse position, roof and shutter colors, cypress position, oak position, row direction and central path, sun position, horizon line, cloud layout, camera position, framing). 7. **Motion Map**: a table of every element that can move in the video, with columns: element, type of motion, direction, speed (very slow, slow, medium), and how strongly it should move. Include the lavender, the haze, the sun glow, the clouds, the trees, bees or birds, and the camera move. Keep total motion subtle and physically plausible, with one wind direction. 8. **Prompt Seed A - Hero Still Image**: a ready-to-paste image prompt under 170 words for a wide landscape 16:9 frame, with the lavender rows, the stone farmhouse, and the sunrise in the first sentence, ending with: no people, no text, no logos. 9. **Prompt Seed B - Image-to-Video Animation**: a ready-to-paste video prompt under 120 words that starts from the hero still as the first frame, describes the lavender swaying, the haze drifting, the glow brightening, small clouds drifting, one very slow push-in along the central row for about 6 seconds, and says to keep the farmhouse, trees, rows, and framing exactly as in the image with no new objects. Rules: no people, vehicles, or farm machinery; no text, signs, or logos; no fast camera moves or cuts; and no motion that breaks physics (all plants bend the same way in the wind, the house and trees never move or change shape, the sun does not jump, shadows stay consistent with the sun). Use short paragraphs and lists.
Start from the step 2 image "Stone Farmhouse at the End of Lavender Rows in Provence at Sunrise" as the exact first frame, and animate it into a calm ${duration:6}-second cinematic shot. Keep the stone farmhouse with its terracotta roof and pale blue shutters in the right third, the tall cypress beside it, the lone oak tree on the left, the converging lavender rows and central path, the low sun at the far left, the horizon line, and the composition exactly as in the image. A gentle breeze makes the lavender rows sway softly, all in the same direction. The camera makes a very slow, steady push-in along the central row toward the farmhouse. The sun's golden glow slowly brightens and thin morning haze drifts across the hills on the left. A couple of small birds fly across the sky from right to left above the house, a few bees drift over the lavender in the foreground, and the small white clouds drift slightly. Natural, realistic motion, no cuts, no people, no new buildings or objects, no text. Soft sound of a light breeze, distant birdsong, and buzzing bees.
BASE – Warm studio Cinematic studio portrait of a Black man in his mid-40s, thick well-groomed full beard, dark smoked sunglasses with black frames, thin gold chain, short natural black hair, black oversized t-shirt, calm grounded expression, no smile. Neutral warm beige backdrop, soft directional key light from the left, subtle rim light. 85mm lens, f/2, medium close-up, eye-level. Black, cream and ochre palette with a touch of gold. Editorial, introspective, film grain. A – Chiaroscuro Dramatic chiaroscuro studio portrait of a Black man in his mid-40s, thick full beard, dark smoked sunglasses, thin gold chain, black t-shirt, calm intense presence. Pure black background, single hard key light from above-left, deep shadows, gold chain catching the light. 85mm, tight close-up, Rembrandt lighting, high contrast, film grain. B – Mirror Introspective studio portrait of a Black man in his mid-40s with thick beard and dark smoked sunglasses, thin gold chain, seated beside a large mirror, reflection slightly out of focus. Warm cream backdrop, soft window light. 50mm, medium shot, beige, black and ochre palette, editorial, subtle grain. C – Black & white Black and white editorial portrait of a Black man in his mid-40s, thick beard, dark sunglasses, thin chain, black cap, arms crossed, grounded posture, no smile. Light grey seamless backdrop, soft box lighting. 70mm, three-quarter angle, magazine cover aesthetic. NEGATIVE: text, watermark, logo, blurry, deformed hands, extra fingers, distorted face, plastic skin, cartoonish, cropped head
Use my uploaded photograph as the primary identity reference. Preserve my recognizable facial structure, eye shape and spacing, nose, lips, jaw, natural skin tone and texture, apparent age, distinctive features and natural asymmetries. Keep my natural body proportions. Do not beautify, slim, rejuvenate or replace me with a generic model. Create a close Halloween beauty portrait of me with patchwork doll makeup. Paint irregular pastel lavender, dusty blue, peach and rose patches across my face, neck and upper chest. Outline them with fine black cosmetic lines and simulated silver stitched loops made from costume prosthetics. There are no actual cuts or injuries. Add violet and blue eyeshadow, tiny painted freckles and burgundy lipstick. Keep my own eye color and facial geometry visible beneath the makeup. Style my hair in a loose swept-up bun, preserving my natural hair color and hairline. Use a neutral gray studio backdrop, a black costume neckline and soft beauty lighting. Create one independent photorealistic portrait in a vertical 4:5 aspect ratio, with realistic anatomy and detailed textures. No text, logos, signature, watermark, collage or social media interface.
Act as a cinematic landscape designer who writes image-ready and motion-ready scene briefs. Help me design one hero shot of traditional brick windmills standing along a straight, calm Dutch polder canal at sunrise. The shot will first be generated as a still image and then animated into a short video that uses that image as its first frame. Your brief must make the still image rich in elements that can move naturally (windmill sails turning slowly, mirror reflections shimmering on the canal, reeds swaying at the water's edge, low morning mist over the meadows, the soft sunrise glow) while keeping the composition calm, readable, and easy to animate. My starting choices: - Windmills: ${windmills:five round tapered brick windmills with dark caps and wooden lattice sails, standing in a row along one bank} - Canal: ${canal:a long straight canal with still, mirror-like water receding to a vanishing point} - Banks: ${banks:grass and reeds on both sides, a narrow dirt path along a grassy dike on the opposite bank} - Foreground detail: ${foreground:a small dark wooden rowboat moored at the water's edge} - Landscape: ${landscape:flat green meadows with low mist and a distant line of trees} - Time and light: ${time:sunrise, soft pink, lilac, and gold sky with a warm glow near the horizon} - Visual style: ${style:photoreal landscape photography, natural colors} - Mood words: ${mood:peaceful, quiet, timeless, fresh} First ask me, in one short message, for anything missing: the camera position I prefer (low at the water's edge, standing height on the bank, or slightly elevated), which bank the windmills should stand on, how close the nearest windmill should be, where the sunrise glow should sit, how much mist I want, and anything to avoid (people, cyclists, boats in motion, cars, modern wind turbines, power lines, signs, text, logos, or copying a specific real photograph). Then produce the brief with these sections: 1. **Scene Overview**: two or three sentences describing the place, the time, the light, and the feeling of the moment. Describe an imagined polder scene in the spirit of the Netherlands, not a copy of a specific photograph or a named landmark. 2. **Windmills**: how many windmills, which bank they stand on, the size of the nearest one in the frame, their brick bodies, caps, small windows, lattice sails and the angle of the sails, the wooden tail or brace structure, and how the low light falls on them. 3. **Canal and Reflections**: the line of the canal toward the vanishing point, how still the water is, which shapes are mirrored, and how the sky colors appear in the water. 4. **Banks and Foreground**: the reeds and grass on each bank, the dike path, the moored rowboat and its rope, and the texture of the closest plants. 5. **Landscape and Depth**: the depth layers from the foreground boat and reeds to the nearest windmill, the receding windmills, the meadows, and the distant tree line, and how mist softens each layer. 6. **Light and Sky**: the position of the sunrise glow, the sky gradient from lilac to pink to gold, the shape of the thin clouds, and how soft the shadows are. 7. **Fixed Visual Details**: a numbered list of 8 to 10 details that must stay identical in the still image and in the video (number and bank of the windmills, nearest windmill position and sail angle, canal line, rowboat position, dike path, horizon line, glow position, cloud layout, camera position, framing). 8. **Motion Map**: a table of every element that can move in the video, with columns: element, type of motion, direction, speed (very slow, slow, medium), and how strongly it should move. Include the sails of each windmill, the reflections, the reeds, the mist, the light, the rowboat, and the camera move. Keep total motion subtle and physically plausible, with one wind direction and all sails turning the same way. 9. **Prompt Seed A - Hero Still Image**: a ready-to-paste image prompt under 170 words for a wide landscape 16:9 frame, with the windmills, the canal, and the sunrise in the first sentence, ending with: no people, no text, no logos. 10. **Prompt Seed B - Image-to-Video Animation**: a ready-to-paste video prompt under 120 words that starts from the hero still as the first frame, describes the sails turning slowly, the reflections shimmering, the reeds swaying, one very slow push-in along the canal for about 6 seconds, and says to keep the windmills, canal, banks, boat, and framing exactly as in the image with no new objects. Rules: no people, animals that must move convincingly, vehicles, or modern turbines; no text, signs, or logos; no fast camera moves or cuts; and no motion that breaks physics (sails rotate around their hub without changing shape, buildings never move, reflections follow the objects above them, the light does not jump). Use short paragraphs and lists.
Start from the step 2 image "Five Brick Windmills Along a Misty Dutch Canal at Sunrise" as the exact first frame, and animate it into a calm ${duration:6}-second cinematic shot. Keep the five brick windmills on the left bank, the large nearest windmill in the left third with its wooden tail brace, the straight canal, the moored rowboat in the lower left, the grassy dike path and reeds on the right bank, the misty meadow, the horizon line, and the composition exactly as in the image. In a gentle breeze, the lattice sails of the nearest windmill turn slowly and clearly around their hub, and the sails of the distant windmills turn too, all in the same direction. The camera makes a very slow, steady push-in along the canal toward the vanishing point. The mirror reflections on the canal shimmer softly, the reeds along both banks sway gently, and the rowboat stays still at its mooring. The light stays a soft pink and gold sunrise glow. Natural, realistic motion, no cuts, no people, no new buildings or objects, no text. Soft sound of a light breeze, creaking sails, and distant birdsong.
I want you to act as a controls technician building an I/O list from electrical drawings. Below is the PLC I/O sheet, typed or pasted as printed: ${Drawing number and revision}. Target platform: ${Platform:any}. Transcribe it into a table with one row per channel: Rack/Slot/Channel | Address as printed | Wire number | Terminal | Field device tag | Description as printed | Device type | NO/NC | Signal type and range | Proposed PLC tag name | Notes Rules: 1. Copy text exactly as printed. Do not correct spelling, tag names or wire numbers. Mark anything unreadable as ILLEGIBLE. 2. Do not fill NO/NC, signal type or range from typical values. If the sheet does not state it, write NOT ON DRAWING. 3. Spare channels get their own rows marked SPARE. 4. Proposed tag names follow this convention: ${Tag naming convention:Area_Device_Function}. Keep them separate from the printed text. 5. After the table, list: duplicate addresses or wire numbers, channels with a device but no description, redlines or clouded changes you noticed, and questions for the drawing owner. Give the table as CSV as well, so I can import it. === DRAWING SHEET === ${Paste or describe the I/O sheet}
A photorealistic macro photograph of a round glass bowl terrarium on a wooden desk, holding a tiny moss landscape with a miniature cabin and a waterfall, in a square 1:1 frame. The clear, open-topped glass bowl fills most of the frame and is covered with small condensation droplets on the inside. On the left, a tiny weathered wooden cabin with a steep shingled roof and a small brick chimney sits on a mossy rise; a single window glows warm amber as if a lamp is lit inside. From its door, a winding path of flat grey stepping stones curves down through the moss toward the front of the bowl. On the right, a thin silvery waterfall pours between jagged grey rocks into a small, still pond near the bottom center. Around everything grow plump cushions of bright green moss, delicate ferns, and small leafy plants, with dark soil and pebbles visible through the curved glass at the base. The bowl stands on a warm brown wooden desk with visible grain; the background is a soft blurred window with green foliage and daylight. Soft natural side light, shallow depth of field, crisp detail on the droplets and moss, cozy and magical miniature-world mood. No people, no text, no logos.
Act as a cinematic landscape designer who writes image-ready and motion-ready scene briefs. Help me design one hero shot of a quiet footpath through a tall bamboo forest at dusk, lit by fireflies. The shot will first be generated as a still image and then animated into a short video that uses that image as its first frame. Your brief must make the still image rich in elements that can move naturally (fireflies drifting and blinking, bamboo stems and leaves swaying, low mist rolling over the ground, a shallow stream glinting, the last blue light of twilight) while keeping the composition calm, symmetrical, readable, and easy to animate. My starting idea: ${idea:a stone path between tall bamboo at dusk, with fireflies and a little wooden bridge} My starting choices: - Path: ${path:an old stepping-stone path running straight away from the camera toward the center of the frame} - Bamboo: ${bamboo:tall, dense green bamboo stems rising on both sides, their tops closing into a canopy with a gap of sky in the middle} - Water: ${water:a shallow stream trickling down the middle of the path over stones} - Focal point: ${focal:a small arched wooden footbridge with railings crossing in the middle distance} - Fireflies: ${fireflies:many small glowing yellow-green fireflies scattered through the air and the undergrowth} - Atmosphere: ${atmosphere:low mist hanging around the bridge and over the path} - Time and light: ${time:deep blue twilight just after sunset, a few clouds in the sky gap} - Visual style: ${style:photoreal night landscape photography, natural colors} - Mood words: ${mood:calm, magical, hushed, inviting} First ask me, in one short message, for anything missing: the camera height (low near the stones, standing eye level, or slightly raised), how centered and symmetrical I want the path, how bright and how many fireflies, how much mist, whether the bridge should be close or far, and anything to avoid (people, animals, lanterns, buildings, text, logos, or copying a specific real photograph or a named landmark). Then produce the brief with these sections: 1. **Scene Overview**: two or three sentences on the place, the moment, the light, and the feeling. Describe an imagined bamboo forest in an East Asian spirit, not a copy of a specific photograph or a famous real grove. 2. **Path and Stream**: the shape and line of the stepping stones toward the vanishing point, the stone texture and moss, how the shallow stream runs down the path from under the bridge, and where the water catches light. 3. **Bamboo Walls and Canopy**: stem thickness, spacing, and nodes on each side, how they rise and lean inward, the leaf canopy, the gap of sky, and the ferns and grasses at their feet. 4. **The Footbridge**: size in the frame, shape of the arch, the wooden railings, the darker opening under it, and how mist gathers around it. 5. **Fireflies**: density, size, color, how they are spread through the air, the undergrowth, and the depth layers, and how their glow should read against the dark bamboo without looking like stars or bokeh dust. 6. **Light, Sky, and Mist**: the twilight sky gradient in the canopy gap, the cool blue ambient light, the warm-green firefly accents, the layers of mist, and how soft the shadows are. 7. **Fixed Visual Details**: a numbered list of 8 to 10 details that must stay identical in the still image and in the video (path line, stream position, bridge position and shape, bamboo walls on both sides, sky gap shape, mist zones, camera position, framing, overall firefly distribution). 8. **Motion Map**: a table of every element that can move in the video, with columns: element, type of motion, direction, speed (very slow, slow, medium), and how strongly it should move. Include the fireflies (drift and blink), the bamboo stems and leaves, the mist, the stream, the light, and the camera move. Keep total motion subtle and physically plausible, with one breeze direction. 9. **Prompt Seed A - Hero Still Image**: a ready-to-paste image prompt under 170 words for a wide landscape 16:9 frame, with the bamboo path, the fireflies, and the footbridge at dusk in the first sentence, ending with: no people, no text, no logos. 10. **Prompt Seed B - Image-to-Video Animation**: a ready-to-paste video prompt under 120 words that starts from the hero still as the first frame, describes the fireflies drifting and blinking, the bamboo swaying gently, the mist rolling low, the stream glinting, one very slow dolly forward along the path toward the bridge for about 6 seconds, and says to keep the path, bamboo, bridge, sky, and framing exactly as in the image with no new objects. Rules: no people, animals, lanterns, or buildings; no text, signs, or logos; no fast camera moves or cuts; and no motion that breaks physics (bamboo bends from the base and does not stretch, the bridge and stones never move, fireflies drift slowly and do not streak, the light does not jump). Use short paragraphs and lists.
Start from the step 2 image "Bamboo Forest Footpath with Fireflies and a Wooden Footbridge at Dusk" as the exact first frame, and animate it into a calm ${duration:6}-second cinematic shot. Keep the stepping-stone path, the shallow stream running down its center, the small arched wooden footbridge in the middle distance, the tall bamboo walls on both sides, the gap of deep blue twilight sky, the mist around the bridge, and the composition exactly as in the image. The camera makes a very slow, smooth dolly forward along the path toward the bridge. The yellow-green fireflies drift gently through the air and blink softly on and off at different times. The bamboo stems and leaves sway slightly in a light breeze, all in the same direction. Low mist rolls slowly over the path and around the bridge, and the stream glints and ripples as it flows toward the camera. The cool blue twilight light stays steady. Natural, realistic motion, no cuts, no people, no animals, no new objects, no text. Soft sound of trickling water, rustling bamboo leaves, and evening insects.
Create one vertical anime development board for an original 15-second short film titled "The Summer Detour". The output must be one combined image with 2 sections: Character design sheet Cinematic storyboard page STYLE: Beautiful nostalgic 2D anime, hand-painted countryside backgrounds, clean anime linework, soft cel shading, lush green scenery, warm summer afternoon sunlight, gentle shadows, and bright blue skies with fluffy clouds. Professional anime production board with red storyboard borders, blue camera arrows, small handwritten camera notes, and beautifully illustrated keyframes. SECTION A: CHARACTER DESIGN Main girl: An original 13-year-old Japanese girl with shoulder-length dark brown hair, soft brown eyes, and a gentle, cheerful expression. Outfit: cream short-sleeved blouse, faded navy skirt, white socks, brown shoes, and a small canvas shoulder bag. Personality: calm, curious, thoughtful, and quietly happy. Show front, side, three-quarter, and back views, plus smiling, thoughtful, relaxed, and surprised expressions. Include cycling, sitting, and looking toward the horizon poses. BICYCLE: Vintage mint-green city bicycle with a silver handlebar, brown saddle, small front wire basket, and simple black tires. A clear glass bottle of lemon soda sits securely inside the basket. Keep the bicycle's design consistent in every frame. SECTION B: STORYBOARD Create 8 storyboard frames in a clean grid, each using 16:9 cinematic framing. Keep the girl, bicycle, countryside, and lighting consistent. Story beats: Wide opening shot of the girl cycling along a peaceful countryside road surrounded by green rice fields. Beautiful close-up of bicycle wheels turning beside swaying grass, sunlight sparkling through the spokes. Side-tracking shot as she cycles past expansive rice paddies beneath enormous fluffy summer clouds. She passes a small traditional house with hanging wind chimes gently swaying in the breeze. She reaches a quiet grassy riverbank, stops, and parks her bicycle beside a tree. Sitting in the grass, she opens her cold lemon soda and takes a refreshing sip. A small cream-and-orange local train crosses a distant bridge over the river. She watches it with a gentle smile. Spectacular wide ending shot: the camera rises to reveal the winding river, endless green fields, distant mountains, passing train, and girl resting beside her bicycle under a magnificent summer sky. ENVIRONMENT: Peaceful rural Japanese countryside, vibrant rice paddies, narrow asphalt roads, traditional wooden houses, wind chimes, wildflowers, a clear river, an old railway bridge, distant green mountains, and beautiful summer clouds. Bright late-afternoon sunlight throughout. FINAL GOAL: Create a beautiful nostalgic anime film development board with soothing countryside scenery, authentic everyday moments, natural cinematic movement, consistent character design, and a breathtaking peaceful ending.
Act as an interior designer and visualization art director. Beside the door, put the logo in modern acrylic signage (transparent, and it has its own coloring). Do not change the picture; just put the signage in a modern way
A mid-century modern travel poster illustration of a Norwegian fjord with a small red ferry, in a portrait 3:4 frame, in a flat screen-print style with no text. A large, perfectly round mustard-yellow sun disc hangs at the top center in a pale butter-yellow sky. Steep cliffs rise on both sides like a gateway: on the left, tall slate-grey rock faces with olive-green grassy ledges and white snow patches, with a long, thin white waterfall tumbling down the cliff into the water; on the right, a grey cliff with snow on its upper slopes and a dark green forested hillside below. At the far end of the fjord, sharp snow-covered mountain peaks in white and pale grey close the view in the center. The deep teal-blue water fills the lower third, drawn with simple white and light-blue wave lines and reflections. In the lower left foreground, a small red-and-white ferry with a white cabin, a red upper deck, and a short mast sails toward the right, leaving a white wake trailing behind it to the left. On a grassy point along the right shore sits a small village of about six red wooden houses with white roofs, with a few dark green trees and a pale rocky shoreline. Limited palette of slate grey, teal blue, olive and forest green, red, cream, and mustard yellow, crisp simplified shapes, subtle halftone and visible paper grain texture, vintage 1950s travel advertising mood. No text, no lettering, no logos.
Act as a cinematic landscape designer who writes image-ready and motion-ready scene briefs. Help me design one hero shot of a steaming outdoor hot spring (onsen) beside a traditional mountain inn during snowfall at dusk. The shot will first be generated as a still image and then animated into a short video that uses that image as its first frame. Your brief must make the still image rich in elements that can move naturally (steam drifting and curling over the water, snowflakes falling, soft snow slipping off a pine branch, gentle ripples on the pool, the warm glow of lanterns and windows) while keeping the composition calm, balanced, readable, and easy to animate. My starting idea: ${idea:a steaming rock-lined hot spring in the snow next to an old wooden inn, at blue hour, with stone lanterns} My starting choices: - Pool: ${pool:a natural outdoor pool of clear teal water framed by dark volcanic rocks capped with snow, filling the center and foreground} - Steam: ${steam:thick white steam rising from the water and drifting to one side} - Inn: ${inn:a two-storey traditional Japanese wooden inn on the right with snow-covered tiled roofs and rows of warmly lit windows} - Lanterns: ${lanterns:two snow-capped stone lanterns glowing softly, one small on the left rocks and one larger near the inn} - Trees and mountains: ${trees:snow-laden pine trees behind the pool and a dark forested mountain slope on the left} - Weather: ${weather:large soft snowflakes falling slowly} - Time and light: ${time:deep blue twilight just after sunset, warm amber light from the inn and lanterns} - Visual style: ${style:photoreal travel and landscape photography, natural colors} - Mood words: ${mood:quiet, warm, peaceful, wintry, inviting} First ask me, in one short message, for anything missing: the camera height (low near the water, eye level, or slightly raised), how much of the frame the inn should take, how dense the steam and snowfall should be, how bright the windows and lanterns are, whether I want one small natural event in the video (for example a clump of snow sliding off a pine branch into the pool), and anything to avoid (people, bathers, animals, text, signs, logos, or copying a specific real inn, photograph, or named landmark). Then produce the brief with these sections: 1. **Scene Overview**: two or three sentences on the place, the moment, the light, and the feeling. Describe an imagined mountain hot spring inn in a Japanese spirit, not a copy of a specific real ryokan or a famous photograph. 2. **The Pool and Rocks**: the pool's shape and size in the frame, the water color and clarity, the dark rocks around it and the snow on their tops, and where the water catches warm and cool light. 3. **Steam**: how thick it is, where it rises most, which way it drifts, how it softens the background, and how it should read as warm vapor rather than fog or smoke. 4. **The Inn**: its position, number of storeys, roof shape and the snow on it, the wooden walls, the rows of lit windows, and how much detail is visible through the steam and snow. 5. **Lanterns, Trees, and Mountain**: the two stone lanterns with snow caps and their glow, the snow-laden pines behind the pool (including one branch above the water that could shed snow), and the dark mountain slope against the sky. 6. **Light, Sky, and Snow**: the deep blue twilight sky, the cool ambient light on the snow, the warm amber accents from the windows and lanterns, the size and density of the falling snowflakes, and how soft the shadows are. 7. **Fixed Visual Details**: a numbered list of 8 to 10 details that must stay identical in the still image and in the video (pool shape and position, rock edges, inn position and roofline, window pattern, both lantern positions, pine trees, mountain silhouette, camera position, framing, overall steam zone). 8. **Motion Map**: a table of every element that can move in the video, with columns: element, type of motion, direction, speed (very slow, slow, medium), and how strongly it should move. Include the steam, the snowfall, the water surface, the lantern and window glow, one optional snow clump falling from a pine branch into the pool with a small splash and ripples, and the camera move. Keep total motion subtle and physically plausible, with one gentle air direction. 9. **Prompt Seed A - Hero Still Image**: a ready-to-paste image prompt under 170 words for a wide landscape 16:9 frame, with the steaming hot spring, the snowy inn, and the stone lanterns at blue hour in the first sentence, ending with: no people, no text, no logos. 10. **Prompt Seed B - Image-to-Video Animation**: a ready-to-paste video prompt under 120 words that starts from the hero still as the first frame, describes the steam drifting and curling, snow falling, the steady glow of lanterns and windows, a slow gentle push-in toward the pool and the inn for about 6 seconds, and (if I want it) one clump of snow falling from a pine branch into the pool with a small splash and spreading ripples, and says to keep the pool, rocks, inn, lanterns, trees, and framing exactly as in the image with no new objects. Rules: no people, bathers, or animals; no text, signs, or logos; no fast camera moves or cuts; and no motion that breaks physics (rocks, lanterns, and the inn never move, steam rises and drifts and does not pour downward, snow falls slowly and evenly, a falling snow clump drops straight down under gravity and makes only a small splash, the light does not flicker or jump). Use short paragraphs and lists.
Start from the step 2 image "Steaming Outdoor Hot Spring Beside a Snowy Mountain Inn at Blue Hour" as the exact first frame, and animate it into a calm ${duration:6}-second cinematic shot. Keep the teal hot spring pool, the dark snow-capped rocks around it, the small stone lantern on the left, the larger stone lantern on the right, the two-storey wooden inn with its snowy roofs and warmly lit windows, the snow-laden pine trees, the dark mountain slope, the deep blue twilight sky, and the composition exactly as in the image. The camera makes a slow, gentle push-in toward the pool and the inn. Thick white steam drifts and curls slowly over the water and rises toward the trees. Large soft snowflakes keep falling evenly across the scene. The lanterns and the inn windows glow steadily without flickering. About two thirds of the way through, a small clump of snow slips off a pine branch above the pool and drops straight down into the water near the center, making a small white splash and soft ripples that spread outward and fade. The shot ends calm, with the steam still drifting. Natural, realistic motion, no cuts, no people, no animals, no new objects, no text. Soft sound of bubbling water, a quiet splash, and the hush of falling snow.
Ultra-high-resolution 4K enhancement based strictly on the provided reference image. Absolute fidelity to original facial anatomy, proportions, and identity. Preserve expression, gaze, pose, camera angle, framing, and perspective with zero deviation. Clothing, hair, skin, and background elements must remain unchanged in structure, placement, and design. Recover fine-grain detail with natural realism. Enhance pores, fine lines, hair strands, eyelashes, fabric weave, seams, and material edges without introducing stylization. Maintain original color science, white balance, and tonal relationships exactly as captured. Lighting direction, intensity, contrast, and shadow behavior must match the source image precisely, with only improved clarity and expanded dynamic range. No relighting, no reshaping. Remove any grain. Apply controlled sharpening and high-frequency detail reconstruction. Remove compression artifacts and noise while retaining authentic texture. No smoothing, no plastic skin, no artificial gloss. Facial features must remain consistent across the entire image with coherent anatomy and clean, stable edges. Negative constraints: no warping, no facial drift, no added or missing anatomy, no altered hands, no distortions, no perspective shift, no text or graphics, no hallucinated detail, no stylized rendering. Output must read as a true-to-life, photorealistic upscale that matches the reference exactly, only clearer, sharper, and higher resolution
A backlit layered papercut lightbox (cut-paper shadow box) of a haunted Victorian mansion on a hill in front of a huge glowing orange harvest moon, vertical portrait 3:4. In the center stands a dark purple Victorian mansion with a tall central pointed tower, steep gables, and a wraparound porch with columns and front steps, its arched windows glowing warm yellow-orange. Wavy layered bands of deep purple and violet paper form the sky at the top, with soft purple paper clouds on both sides and five or six small black paper bats. On the right, a big twisted bare black tree reaches over the scene, a wooden swing hanging from it on two chains. A winding path of grey paper stepping stones leads from the bottom center up the hill to the porch steps. Black wrought-iron spiked fences stand on the left and right, rounded tombstones sit in the dark foreground, and layers of orange spiky grass and rolling orange and purple hills fill the middle. Visible paper texture, cut edges, and soft shadows between the layers. Spooky but charming mood. No people, no text, no logos.
Act as a cinematic landscape designer who writes image-ready and motion-ready scene briefs. Help me design one hero shot of a red wooden covered bridge over a calm, misty river in peak autumn foliage at sunrise. The shot will first be generated as a still image and then animated into a short video that uses that image as its first frame. Your brief must make the still image rich in elements that can move naturally (low mist drifting over the water, a few leaves falling and floating, soft ripples, light shimmering on the reflection, branches swaying slightly) while keeping the composition calm, balanced, readable, and easy to animate. My starting idea: ${idea:a classic red covered bridge over a still river at sunrise, with low mist on the water and blazing autumn trees on both banks} My starting choices: - Bridge: ${bridge:a long red wooden covered bridge with a dark grey shingled roof, an open entrance with white trim on the left end, resting on stone abutments} - Position: ${position:spanning the river slightly right of center, seen from the water level a little downstream} - River: ${river:a calm, mirror-still river filling the lower half of the frame, reflecting the bridge and the trees} - Mist: ${mist:a thin low layer of mist drifting over the water and under the bridge} - Trees: ${trees:dense orange, red, and yellow maples and birches on both banks, brighter and sunlit on the left, deeper red on the right} - Leaves on the water: ${leaves:many small fallen leaves floating in the foreground} - Time and light: ${time:just after sunrise, soft golden light from the left and a clear pale blue sky with warm haze} - Visual style: ${style:photoreal landscape and travel photography, natural colors} - Mood words: ${mood:quiet, crisp, warm, nostalgic, peaceful} First ask me, in one short message, for anything missing: the camera height (just above the water, bank level, or slightly raised), how much of the frame the bridge should take, how thick the mist should be, how many floating leaves I want, whether I want overhanging branches at the top edge to frame the shot, whether the video should include a few leaves falling onto the water and making ripples, and anything to avoid (people, cars, animals, boats, text, signs, logos, or copying a specific real bridge, photograph, or named landmark). Then produce the brief with these sections: 1. **Scene Overview**: two or three sentences on the place, the moment, the light, and the feeling. Describe an imagined rural covered bridge in a classic countryside spirit, not a copy of a specific real bridge or a famous photograph. 2. **The Covered Bridge**: its length and position in the frame, the red board siding, the shingled roof, the open entrance and its trim, the stone abutments, and how the morning light falls on it. 3. **The River and Reflection**: the water surface, how still it is, how clearly it mirrors the bridge and trees, where it catches warm light, and the floating leaves in the foreground. 4. **Mist**: how thick it is, where it lies (on the water, under the bridge, along the far bank), which way it drifts, and how it should read as soft morning river mist rather than smoke or fog filling the whole frame. 5. **Autumn Trees and Sky**: the colors and density of the foliage on each bank, where the sunlight hits, the edge of the woods against the sky, and the pale blue sky with warm golden haze. 6. **Light and Color**: the direction and warmth of the sunrise light, the cool shadows, the balance of red, orange, and yellow against blue, and how soft the contrast is. 7. **Fixed Visual Details**: a numbered list of 8 to 10 details that must stay identical in the still image and in the video (bridge position and length, roof line, entrance on the left end, stone abutments, both tree lines, river edges, reflection, camera position, framing, overall mist zone). 8. **Motion Map**: a table of every element that can move in the video, with columns: element, type of motion, direction, speed (very slow, slow, medium), and how strongly it should move. Include the mist, a few leaves falling and landing on the water, the floating leaves, the ripples they make, the shimmer on the reflection, a slight sway of branches, and the camera move. Keep total motion subtle and physically plausible, with one gentle air direction. 9. **Prompt Seed A - Hero Still Image**: a ready-to-paste image prompt under 170 words for a wide landscape 16:9 frame, with the red covered bridge, the misty river, and the peak autumn trees at sunrise in the first sentence, ending with: no people, no text, no logos. 10. **Prompt Seed B - Image-to-Video Animation**: a ready-to-paste video prompt under 120 words that starts from the hero still as the first frame, describes a slow gentle push-in toward the bridge for about 6 seconds, mist drifting over the water and under the bridge, a few red and orange maple leaves fluttering down and landing on the water with soft spreading ripples, and the reflection shimmering, and says to keep the bridge, banks, trees, river, and framing exactly as in the image with no new objects. Rules: no people, cars, boats, or animals; no text, signs, or logos; no fast camera moves or cuts; and no motion that breaks physics (the bridge, stone abutments, and banks never move, the water stays calm and flows gently in one direction, leaves fall slowly and float on the surface, ripples spread outward in circles and fade, mist drifts and does not pour or swirl violently, the light does not flicker or jump). Use short paragraphs and lists.
Start from the step 2 image "Red Covered Bridge Over a Misty River in Peak Autumn Foliage" as the exact first frame, and animate it into a calm ${duration:6}-second cinematic shot. Keep the red covered bridge with its dark grey shingled roof, the white-trimmed entrance on the left end, the stone abutments, the orange, red, and yellow trees on both banks, the mirror-still river with its reflection, the pale blue sky with golden haze, and the composition exactly as in the image. The camera makes a slow, steady push-in toward the bridge, so the bridge grows larger and moves toward the center of the frame, while a few overhanging orange and red maple branches from the near bank come into view along the top edge as natural foreground framing. Low mist keeps drifting slowly over the water and under the bridge. Several red and orange maple leaves flutter down in front of the bridge and land softly on the water, each making circular ripples that spread outward across the lower foreground and fade, while the reflection of the bridge shimmers gently in the ripples. The shot ends calm in soft golden sunrise light. Natural, realistic motion, no cuts, no people, no animals, no boats, no text. Soft sound of the river, a light breeze in the leaves, and quiet drips as the leaves touch the water.
--- name: open-graph-and-social-share-meta-tag-checker description: Checks a page's HTML source for the tags link previews are built from - title and description length, rel=canonical, og:title/description/type/url/site_name/locale, og:image size, aspect, alt and SVG, twitter:card and handles. Flags relative/http:// URLs, tracking parameters, theme + SEO plugin duplicates, tags in <body> and unrendered {{ }} placeholders, and returns a fixed <head> block. Includes an offline stdlib Python checker with --self-test. --- # Open Graph and Social Share Meta Tag Checker You make shared links look right on Facebook, LinkedIn, X, Slack, Discord, WhatsApp and iMessage. You read the page source the crawlers see, show the user what the preview will be built from (title, description, image, domain), explain why a preview is blank, cropped or showing the logo, and hand back a corrected `<head>` block. You work from saved HTML; you never claim you fetched the live page or saw a platform's cache. ## Files in this skill - `scripts/og_meta_check.py` - parses HTML with `html.parser` and checks title, description, canonical, og:* and twitter:* tags; with `--root` it reads the real width/height and file size of local PNG/JPEG/GIF/WebP share images (Python 3.8+ standard library only) - `references/tag-rules.md` - each tag, the values crawlers accept, lengths, image sizes and fallbacks - `references/platform-notes.md` - how Facebook, LinkedIn, X, Slack, Discord, WhatsApp and iMessage build previews, cache them and how to refresh - `templates/share-meta-review.md` - the review to hand back (preview, fix table, fixed head block, refresh steps) - `examples/product-page.html` - a product page whose theme and SEO plugin both write tags, with mistakes on purpose - `examples/product-page-fixed.html` - the same page with a correct head (checks clean) - `examples/meta-report.md` - the real output of the checker on the broken example ## Workflow ### 1. Get the HTML the crawlers see Ask for the page URL and the server-rendered source, not the DevTools Elements view (that shows tags added by JavaScript, which most crawlers never run): ``` curl -sL -A "facebookexternalhit/1.1" https://example.com/page -o page.html curl -sL -A "Twitterbot/1.0" https://example.com/page -o page-x.html ``` For a static site or a build folder, point the checker at the folder and pass `--root` so share images are measured from disk. Ask which platforms matter most (B2B: LinkedIn and Slack; consumer: WhatsApp, iMessage, Facebook, X). ### 2. Run the checker ``` python3 scripts/og_meta_check.py examples/product-page.html --url https://shop.example.com/shoes/trail-grip python3 scripts/og_meta_check.py dist/ --root dist/ --min-severity MEDIUM python3 scripts/og_meta_check.py page.html --url https://example.com/blog/post --json python3 scripts/og_meta_check.py --self-test ``` Give `--url` for a single page so relative links are resolved and canonical/og:url compared. Exit 0 = no HIGH, 1 = HIGH findings, 2 = bad input. If you cannot run code, walk through `references/tag-rules.md` in the same order. ### 3. Explain the preview - Start with the preview table: that is what people will see. A missing, relative or SVG `og:image` is the usual reason for a bare text link; a square or small image gets a small thumbnail instead of a large card. - **HIGH** breaks the preview (no or relative og:image, image under 200x200, no title, several canonicals). **MEDIUM** shows the wrong thing (duplicates, placeholders, tags in `<body>`, invalid twitter:card, tracking parameters, SVG). **LOW** is polish (lengths, alt text, locale format, site_name). - Duplicates usually come from two systems (theme plus SEO plugin, framework default plus page component). Say which one to switch off rather than adding a third set. ### 4. Deliver Fill `templates/share-meta-review.md`: the before/after preview, the fix table, one complete `<head>` block with real values (or clearly marked placeholders), the share image spec (1200x630 JPEG/PNG under ~1 MB, text in the safe centre), and how to refresh caches (Facebook Sharing Debugger "Scrape Again", LinkedIn Post Inspector; X, Slack and WhatsApp re-fetch after their cache expires or with a changed URL). ## Example result On `examples/product-page.html` the checker reports 21 findings (HIGH 1, MEDIUM 10, LOW 10): the only og:image in `<head>` is a relative SVG logo, the real product image sits in `<body>` at 800x800, the SEO plugin adds a second og:title with an unrendered `{{ product.name }}`, og:url carries `?utm_source=newsletter` and differs from the relative canonical, `twitter:card` is `large`, twitter:site is a URL instead of `@peakline`, og:description uses `name=` and runs 269 characters, and the title is just `Peakline`. `examples/product-page-fixed.html` checks clean (exit 0). ## Rules - Judge the server-rendered HTML; say plainly when tags exist only after JavaScript runs. - Never invent product facts, prices or brand handles for the fixed tags; use the page's own copy or mark `<placeholder>`. - One value per single-value tag; remove the duplicate source instead of overriding it. - All URLs in og:url, og:image, twitter:image and canonical must be absolute https:// URLs without tracking parameters. - Do not promise how a platform will crop or when it refreshes; give the documented sizes and the refresh tool, and mark the rest "to verify" in the platform's debugger. - Keep og:title free of the site-name suffix (og:site_name carries the brand) unless the user wants it. FILE:references/tag-rules.md # Tag rules Review order: title and description -> canonical -> og core tags -> og:image -> twitter:* -> placement, duplicates and placeholders. ## Basic head tags | Tag | Rule | Checker range | |---|---|---| | `<meta charset="utf-8">` | first in `<head>`, so non-ASCII text in previews is decoded | LOW if missing | | `<title>` | one per page, specific, brand at the end | 15-60 characters (LOW outside) | | `<meta name="description">` | one, plain sentence(s), no keyword lists | 50-160 characters (LOW outside) | | `<link rel="canonical">` | one, absolute https URL, no tracking parameters, in `<head>` | MEDIUM missing/relative, HIGH several | ## Open Graph (ogp.me) - Use `property="og:..."` and `content="..."`. `name="og:..."` works on some platforms only; `value=` or text content is ignored. - `og:title` - the headline without the site suffix, up to ~70 characters shown fully (checker warns over 90). - `og:description` - 1-2 sentences, ~200 characters max shown. - `og:type` - `website` for home and landing pages, `article` for posts (add `article:published_time`), `product` for shop pages. - `og:url` - the canonical URL, so likes and shares of `?utm=` variants merge into one object. - `og:site_name` - the brand; LinkedIn and Slack show it above the title. - `og:locale` - `language_TERRITORY` with an underscore: `en_US`, `de_DE`, `pt_BR`; alternates with `og:locale:alternate`. - Single-value tags (`og:title`, `og:description`, `og:type`, `og:url`, `og:site_name`, `og:locale`) must appear once. `og:image` may repeat (several images); the first is usually used. ## og:image - Absolute https URL that returns 200 to crawlers without login, cookies or hotlink protection, `Content-Type: image/jpeg|png|webp|gif`. - Size: at least 200x200 (Facebook minimum, HIGH below), 1200x630 recommended for large cards (MEDIUM below), 1.91:1 aspect for `summary_large_image` (LOW if outside 1.75-2.05). `summary` cards use a square crop. - File size: under ~1 MB loads reliably; X rejects images over 5 MB, Facebook over 8 MB. - SVG is not rendered by the major platforms (MEDIUM). Animated GIFs show the first frame. - Add `og:image:width` and `og:image:height` (whole numbers, pixels) so Facebook renders the first share before it has downloaded the image; with `--root` the checker compares them with the file. - `og:image:alt` - a sentence describing the image (used by X and LinkedIn for screen readers). - Change the image URL (e.g. `share-v2.jpg`) when you replace an image; platforms cache by URL. ## X (Twitter) cards - `twitter:card`: `summary`, `summary_large_image`, `app` or `player`. Anything else is invalid; without the tag X falls back to a small summary card. - X reads `og:title`, `og:description` and `og:image` when `twitter:title/description/image` are absent, so only add those to show different text on X. - `twitter:site` (the brand) and `twitter:creator` (the author) are `@handles`, not URLs. ## Placement, duplicates, placeholders - Crawlers read `<head>` only. A `<div>`, `<img>` or text before `</head>` ends the head implicitly in HTML parsing, so tags after it count as body tags. - Theme + SEO plugin (WordPress, Shopify), framework default + page component (Next.js `metadata`, Nuxt `useHead`) are the usual sources of duplicates. Keep one source. - Unrendered template text (`{{ product.name }}`, `${title}`, `<%= %>`), `undefined`, `null`, `[object Object]`, `NaN`, `TODO` and lorem ipsum mean the server rendered the tag before the data was ready, or a client-only component wrote it. - Tracking parameters (`utm_*`, `fbclid`, `gclid`, `ref`, `mc_cid`) never belong in canonical or og:url. ## Fixed head block (shape) ``` <meta charset="utf-8"> <title>{Page headline} | {Brand}</title> <meta name="description" content="{50-160 characters}"> <link rel="canonical" href="https://{host}/{clean-path}"> <meta property="og:type" content="website"> <meta property="og:site_name" content="{Brand}"> <meta property="og:title" content="{Headline}"> <meta property="og:description" content="{1-2 sentences}"> <meta property="og:url" content="https://{host}/{clean-path}"> <meta property="og:image" content="https://{host}/img/{name}-1200x630.jpg"> <meta property="og:image:width" content="1200"> <meta property="og:image:height" content="630"> <meta property="og:image:alt" content="{What the image shows}"> <meta property="og:locale" content="en_US"> <meta name="twitter:card" content="summary_large_image"> <meta name="twitter:site" content="@{brand}"> ``` FILE:references/platform-notes.md # Platform notes What each app reads, how long it caches, and how to refresh. Behaviour changes over time: confirm in the platform's own debugger before promising a result. | Platform | Crawler user agent | Reads | Image used | Cache / refresh | |---|---|---|---|---| | Facebook, Messenger | `facebookexternalhit/1.1` | og:*, then title/description | og:image, 1200x630 large card, 200x200 minimum | ~30 days; Sharing Debugger -> "Scrape Again" | | Instagram (link stickers, DMs) | Facebook crawler | og:* | og:image | as Facebook | | LinkedIn | `LinkedInBot/1.0` | og:* (title, description, image, site_name) | og:image, 1200x627, min 200 px wide | ~7 days; Post Inspector re-scrapes | | X | `Twitterbot/1.0` | twitter:*, falls back to og:* | twitter:image or og:image; large card needs `summary_large_image` | ~7 days; no public refresh tool, change the URL (add `?v=2` to the shared link, not to canonical) | | Slack | `Slackbot-LinkExpanding 1.0` | og:*, twitter:*, oEmbed | og:image (large when 1.91:1) | ~30 min per workspace; re-post after the fix | | Discord | `Discordbot/2.0` | og:*, twitter:card, `theme-color` for the side bar | large image with `summary_large_image` | cached; append a query string to re-test | | WhatsApp | `WhatsApp/2.x` | og:title, og:description, og:image | og:image; small files (a few hundred KB) give the most reliable thumbnails | per device; new link or new image URL | | iMessage | Apple's link preview fetcher (runs on the sender's device) | og:title, og:image, favicon | og:image or apple-touch-icon | on device | | Telegram | `TelegramBot` | og:* | og:image | @WebpageBot to refresh | ## Common reasons a preview is wrong - **No preview at all:** crawler blocked by robots.txt, login wall, bot protection/WAF challenge, geo-block, or the page returns 403/5xx to unknown user agents. Test with `curl -sI -A "facebookexternalhit/1.1" URL`. - **Old title or image:** the platform cache. Fix the tags, then refresh with the tools above; replace the image under a new filename. - **Logo instead of the product image:** og:image points at the logo, or the right tag sits in `<body>` and is ignored. - **Cropped text on the image:** keep important text inside the centre ~80% of a 1200x630 canvas; LinkedIn and X crop the edges differently. - **Wrong language or mojibake:** missing `<meta charset="utf-8">` or the server sends a different `Content-Type` charset. - **Single-page apps:** tags set by client-side JavaScript are not seen by Facebook, LinkedIn, Slack or WhatsApp. Pre-render or render the head on the server. ## Testing checklist 1. `curl` the page with each crawler user agent and run the checker on the saved files. 2. `curl -sI` the og:image URL: 200, an image Content-Type, size under 1 MB, no redirect to a login page. 3. Paste the URL into Facebook Sharing Debugger and LinkedIn Post Inspector; post it in a private Slack/Discord channel. 4. Record the before/after screenshots in the review. FILE:templates/share-meta-review.md # Share preview review: <page URL> **Source:** <curl -A facebookexternalhit, saved <date>> **Platforms that matter:** <LinkedIn, Slack, WhatsApp> **Result:** <HIGH n, MEDIUM n, LOW n> - <one-sentence verdict, e.g. "shares show the logo and a template placeholder; fix the SEO plugin output"> ## Preview now vs after the fix | Field | Now | After | |---|---|---| | Title | <{{ product.name }} / Peakline> | <Trail Grip - the trail shoe for wet rock> | | Description | <269 characters, cut mid-sentence> | <Grippy, light trail shoes tested on wet granite and mud. ...> | | Image | </img/logo.svg (relative SVG)> | <https://shop.example.com/img/trail-grip-share-1200x630.jpg> | | Card on X | <invalid "large"> | <summary_large_image> | ## Fix list | # | Sev | Tag | Problem | Fix | Where | |---|---|---|---|---|---| | 1 | <HIGH> | <og:image> | <relative SVG logo> | <absolute 1200x630 JPEG> | <theme header.liquid> | | 2 | <MEDIUM> | <og:title> | <duplicate from SEO plugin, unrendered> | <disable theme OG output, keep plugin> | <plugin settings> | ## Fixed head block ``` <paste the complete corrected tags here, in this order: charset, title, description, canonical, og:*, twitter:*> ``` ## Share image spec - <1200x630 JPEG or PNG, under ~1 MB, new filename; text and logo inside the centre 80%> - <alt text: "..."> ## After deploying 1. <curl -sL -A "facebookexternalhit/1.1" <URL> | grep -E 'og:|twitter:|canonical'> 2. <Facebook Sharing Debugger: Scrape Again; LinkedIn Post Inspector: Inspect> 3. <post in a private Slack channel; check X with a fresh share> **To verify (not checked offline):** <image URL returns 200 to crawlers; robots.txt/WAF does not block the user agents; tags present without JavaScript> **Open questions:** <which system should own the tags - theme or SEO plugin? per-product share images available?> FILE:examples/product-page.html <!DOCTYPE html> <html lang="en"> <head> <meta http-equiv="X-UA-Compatible" content="IE=edge"> <title>Peakline</title> <meta name="viewport" content="width=device-width, initial-scale=1"> <meta name="description" content="Shoes."> <link rel="canonical" href="/shoes/trail-grip"> <!-- theme defaults --> <meta property="og:type" content="website"> <meta property="og:title" content="Peakline Shop"> <meta property="og:url" content="https://shop.example.com/shoes/trail-grip?utm_source=newsletter"> <meta property="og:image" content="/img/logo.svg"> <meta property="og:locale" content="en-us"> <!-- SEO plugin --> <meta property="og:title" content="{{ product.name }} | Peakline"> <meta name="og:description" content="Grippy, light trail running shoes tested on wet granite, roots and mud. Compare fit, drop and sole wear across three widths, read 240 reviews from real runners, and order with free returns within 60 days and free shipping on orders over 80 dollars, in every EU country."> <meta name="twitter:card" content="large"> <meta name="twitter:site" content="https://x.com/peakline"> <link rel="stylesheet" href="/css/site.css"> </head> <body> <header><a href="/">Peakline</a></header> <main> <h1>Trail Grip - wet rock trail shoe</h1> <meta property="og:image" content="https://shop.example.com/img/trail-grip-800.jpg"> <meta property="og:image:width" content="800"> <meta property="og:image:height" content="800"> <p>Grippy, light trail shoes tested on wet granite and mud.</p> </main> </body> </html> FILE:examples/product-page-fixed.html <!DOCTYPE html> <html lang="en"> <head> <meta charset="utf-8"> <meta name="viewport" content="width=device-width, initial-scale=1"> <title>Trail Grip Running Shoes for Wet Rock | Peakline</title> <meta name="description" content="Grippy, light trail shoes tested on wet granite and mud. Compare fit, drop and sole wear across three widths, with free 60-day returns."> <link rel="canonical" href="https://shop.example.com/shoes/trail-grip"> <meta property="og:type" content="product"> <meta property="og:site_name" content="Peakline"> <meta property="og:title" content="Trail Grip - the trail shoe for wet rock"> <meta property="og:description" content="Grippy, light trail shoes tested on wet granite and mud. Three widths, free 60-day returns."> <meta property="og:url" content="https://shop.example.com/shoes/trail-grip"> <meta property="og:image" content="https://shop.example.com/img/trail-grip-share-1200x630.jpg"> <meta property="og:image:width" content="1200"> <meta property="og:image:height" content="630"> <meta property="og:image:alt" content="Blue Trail Grip shoe gripping a wet granite slab"> <meta property="og:locale" content="en_US"> <meta name="twitter:card" content="summary_large_image"> <meta name="twitter:site" content="@peakline"> <link rel="stylesheet" href="/css/site.css"> </head> <body> <header><a href="/">Peakline</a></header> <main> <h1>Trail Grip - wet rock trail shoe</h1> <p>Grippy, light trail shoes tested on wet granite and mud.</p> </main> </body> </html> FILE:examples/meta-report.md # Social share meta check Pages: 1 Findings: 21 (HIGH 1, MEDIUM 10, LOW 10) Page URL: https://shop.example.com/shoes/trail-grip ## product-page.html Preview as built from the tags (card: large) | Field | Shown | |---|---| | Domain | shop.example.com | | Title | Peakline Shop | | Description | Grippy, light trail running shoes tested on wet granite, roots and mud. Compare fit, drop and sole wear across three widths, read 240 reviews from real runners, and order with free returns within 6... | | Image | /img/logo.svg | | Sev | Code | Tag | Line | Problem | Fix | |---|---|---|---|---|---| | HIGH | RELATIVE_URL | og:image | 13 | og:image is relative (/img/logo.svg); crawlers need an absolute URL - would mean https://shop.example.com/img/logo.svg | write the full URL, e.g. https://shop.example.com/img/logo.svg | | MEDIUM | RELATIVE_URL | canonical | 8 | canonical is relative (/shoes/trail-grip); crawlers need an absolute URL - would mean https://shop.example.com/shoes/trail-grip | write the full URL, e.g. https://shop.example.com/shoes/trail-grip | | MEDIUM | TRACKING_PARAMS | og:url | 12 | og:url carries tracking parameters (utm_source=newsletter); every share then counts the campaign | use the clean URL without ?utm_/fbclid/gclid | | MEDIUM | IMAGE_SVG | og:image | 13 | SVG images are not rendered by Facebook, X, LinkedIn or Slack | export a PNG or JPEG | | MEDIUM | IMAGE_SMALL | og:image | 13 | image is 800x800 (declared); large previews need at least 1200x630 (shown small or blurry) | use 1200x630 (2400x1260 for sharp retina) | | MEDIUM | PLACEHOLDER_VALUE | og:title | 16 | og:title looks like an unrendered template or placeholder: '{{ product.name }} / Peakline' | fix the template variable | | MEDIUM | DUPLICATE_TAG | og:title | 16 | 2 different og:title values; apps pick the first or last unpredictably | keep one (often a theme and an SEO plugin both add tags) | | MEDIUM | TWITTER_CARD_INVALID | twitter:card | 18 | twitter:card 'large' is not one of summary, summary_large_image, app, player | use summary_large_image (or summary) | | MEDIUM | TAG_OUTSIDE_HEAD | og:image | 26 | og:image is inside `<body>`; Facebook and LinkedIn read only `<head>` | move into `<head>` | | MEDIUM | TAG_OUTSIDE_HEAD | og:image:width | 27 | og:image:width is inside `<body>`; Facebook and LinkedIn read only `<head>` | move into `<head>` | | MEDIUM | TAG_OUTSIDE_HEAD | og:image:height | 28 | og:image:height is inside `<body>`; Facebook and LinkedIn read only `<head>` | move into `<head>` | | LOW | OG_MISSING | og:site_name | - | og:site_name missing: LinkedIn and Slack show the bare domain instead of your brand | `<meta property="og:site_name" content="Brand">` | | LOW | CHARSET_MISSING | meta charset | - | no `<meta charset>`; non-ASCII titles can show as mojibake in previews | `<meta charset="utf-8">` first in `<head>` | | LOW | TITLE_LENGTH | `<title>` | 5 | title is 8 characters (aim for 15-60): 'Peakline' | front-load the key words; search results cut around 60 characters | | LOW | DESCRIPTION_LENGTH | meta description | 7 | description is 6 characters (aim for 50-160) | rewrite to one or two sentences with the key benefit first | | LOW | CANONICAL_OG_URL_MISMATCH | og:url | 12 | og:url (https://shop.example.com/shoes/trail-grip?utm_source=newsletter) differs from canonical (/shoes/trail-grip) | use the canonical URL in og:url | | LOW | IMAGE_ALT_MISSING | og:image:alt | 13 | no og:image:alt (screen readers on X/LinkedIn get nothing) | describe the image in one sentence | | LOW | OG_LOCALE_FORMAT | og:locale | 14 | og:locale 'en-us' should look like en_US (underscore, region in capitals) | e.g. en_US, de_DE, pt_BR | | LOW | OG_DESCRIPTION_LONG | og:description | 17 | og:description is 269 characters; most apps show ~2-3 lines | keep under ~200 characters | | LOW | OG_USES_NAME_ATTR | og:description | 17 | og:description uses name= instead of property= (Open Graph spec; some parsers skip it) | `<meta property="og:description" ...>` | | LOW | TWITTER_HANDLE_FORMAT | twitter:site | 19 | twitter:site 'https://x.com/peakline' should be an @handle | e.g. @brand | Offline check of the saved HTML only: tags injected by JavaScript after load are invisible to most crawlers too, but redirects, robots rules, the live image URL and each platform's preview cache were not tested. FILE:scripts/og_meta_check.py #!/usr/bin/env python3 """Open Graph and social share meta tag checker (Python 3.8+ standard library only). Reads saved HTML (a file, several files, or a folder of *.html) and checks what link previews on Facebook, LinkedIn, X, Slack, Discord, WhatsApp and iMessage will be built from: <title>, meta description, rel=canonical, og:* (title, description, type, url, image, image:width/height/alt/type, site_name, locale) and twitter:* card tags. It flags missing and duplicate tags, relative or http:// URLs, canonical vs og:url mismatches, title/description length, image size hints (declared or, with --root, read from local PNG/JPEG/GIF/WebP files), SVG images, wrong attributes (name= vs property=), tags outside <head>, and template placeholders ({{ }}, TODO, undefined). Usage: python3 og_meta_check.py page.html [more.html | folder/] [--url https://example.com/page] [--root public/] [--min-severity LOW|MEDIUM|HIGH] [--ignore CODE,..] [--json] python3 og_meta_check.py --self-test --url the page's public URL (used to resolve relative links and compare canonical/og:url) --root local folder that maps to the site root, so /img/share.png is read from root/img/share.png Exit codes: 0 = no HIGH findings, 1 = HIGH findings, 2 = bad input. No network calls are made. """ import argparse import json import os import re import struct import sys from html.parser import HTMLParser from urllib.parse import urljoin, urlsplit SEV_ORDER = {"LOW": 1, "MEDIUM": 2, "HIGH": 3} TWITTER_CARDS = ("summary", "summary_large_image", "app", "player") SINGLE_OG = ("og:title", "og:description", "og:type", "og:url", "og:site_name", "og:locale") PLACEHOLDER_RE = re.compile(r"(\{\{|\}\}|\$\{|<%|%>|\bTODO\b|\bTBD\b|lorem ipsum|\bundefined\b|\bnull\b|\[object Object\]|NaN)", re.I) TITLE_RANGE = (15, 60) # search results show roughly 50-60 characters DESC_RANGE = (50, 160) OG_TITLE_MAX = 90 # Facebook/LinkedIn cut long titles around 2 lines OG_DESC_MAX = 200 IMG_MIN = (200, 200) # Facebook minimum IMG_LARGE = (1200, 630) # recommended 1.91:1 IMG_MAX_BYTES = 5 * 1024 * 1024 # X limit 5 MB; Facebook 8 MB class Meta: def __init__(self, key, attr, content, line, in_head): self.key, self.attr, self.content, self.line, self.in_head = key, attr, content, line, in_head class PageParser(HTMLParser): def __init__(self): super().__init__(convert_charrefs=True) self.metas, self.links, self.titles = [], [], [] self.in_head = True # before <body> starts, tags count as head (HTML parsing rules) self.seen_head = False self._in_title, self._title_buf, self._title_line = False, [], 0 self.charset = None self.lang = None def handle_starttag(self, tag, attrs): a = {k.lower(): (v if v is not None else "") for k, v in attrs} line = self.getpos()[0] if tag == "html": self.lang = a.get("lang") elif tag == "head": self.seen_head = True self.in_head = True elif tag == "body": self.in_head = False elif tag == "title": self._in_title, self._title_buf, self._title_line = True, [], line elif tag == "meta": if "charset" in a: self.charset = a["charset"] for attr in ("property", "name", "itemprop"): if a.get(attr): self.metas.append(Meta(a[attr].strip().lower(), attr, a.get("content", None), line, self.in_head)) break elif tag == "link": rel = a.get("rel", "").lower().split() self.links.append({"rel": rel, "href": a.get("href", ""), "line": line, "in_head": self.in_head, "sizes": a.get("sizes", "")}) if tag in ("div", "p", "main", "article", "section", "h1", "img", "span", "header", "nav") and self.in_head and self.seen_head: self.in_head = False # implied <body> def handle_startendtag(self, tag, attrs): self.handle_starttag(tag, attrs) def handle_endtag(self, tag): if tag == "head": self.in_head = False elif tag == "title" and self._in_title: self._in_title = False self.titles.append((" ".join("".join(self._title_buf).split()), self._title_line)) def handle_data(self, data): if self._in_title: self._title_buf.append(data) def image_size(path): """Return (width, height, format) for PNG, GIF, JPEG or WebP, else None.""" with open(path, "rb") as fh: head = fh.read(32) if head[:8] == b"\x89PNG\r\n\x1a\n": w, h = struct.unpack(">II", head[16:24]) return w, h, "png" if head[:6] in (b"GIF87a", b"GIF89a"): w, h = struct.unpack("<HH", head[6:10]) return w, h, "gif" if head[:4] == b"RIFF" and head[8:12] == b"WEBP": fh.seek(12) chunk = fh.read(30) kind = chunk[:4] if kind == b"VP8X": w = int.from_bytes(chunk[12:15], "little") + 1 h = int.from_bytes(chunk[15:18], "little") + 1 return w, h, "webp" if kind == b"VP8 ": w, h = struct.unpack("<HH", chunk[14:18]) return w & 0x3FFF, h & 0x3FFF, "webp" if kind == b"VP8L": b = chunk[9:13] bits = int.from_bytes(b, "little") return (bits & 0x3FFF) + 1, ((bits >> 14) & 0x3FFF) + 1, "webp" return None if head[:2] == b"\xff\xd8": fh.seek(2) while True: m = fh.read(2) if len(m) < 2 or m[0] != 0xFF: return None marker = m[1] if marker in (0xD8, 0x01) or 0xD0 <= marker <= 0xD7: continue seg = fh.read(2) if len(seg) < 2: return None length = struct.unpack(">H", seg)[0] if marker in (0xC0, 0xC1, 0xC2, 0xC3, 0xC5, 0xC6, 0xC7, 0xC9, 0xCA, 0xCB, 0xCD, 0xCE, 0xCF): data = fh.read(5) h, w = struct.unpack(">HH", data[1:5]) return w, h, "jpeg" fh.seek(length - 2, 1) return None def analyze(html, page_url="", root=None, name="page.html"): p = PageParser() p.feed(html) p.close() f = [] def add(sev, code, tag, problem, fix, line=0): f.append({"severity": sev, "code": code, "tag": tag, "problem": problem, "fix": fix, "line": line, "file": name}) metas = {} for m in p.metas: metas.setdefault(m.key, []).append(m) def first(key): v = metas.get(key) return v[0] if v else None def val(key): m = first(key) return (m.content or "").strip() if m and m.content is not None else None page_https = page_url.lower().startswith("https://") def check_abs(tag, url, line, sev_rel="HIGH"): if not url: return s = urlsplit(url) if not s.scheme: resolved = urljoin(page_url, url) if page_url else None add(sev_rel, "RELATIVE_URL", tag, "%s is relative (%s); crawlers need an absolute URL%s" % (tag, url, (" - would mean " + resolved) if resolved else ""), "write the full URL, e.g. %s" % (resolved or "https://example.com" + ("" if url.startswith("/") else "/") + url), line) elif s.scheme == "http" and (page_https or tag.startswith(("og:image", "twitter:image"))): add("MEDIUM", "HTTP_URL", tag, "%s uses http:// (%s); some apps skip insecure images or mix up the canonical" % (tag, url), "use https://", line) # ---- title / description titles = p.titles if not titles or not titles[0][0]: add("HIGH", "TITLE_MISSING", "<title>", "no <title>; search results and many previews fall back to the URL", "add a specific <title> of 15-60 characters") else: t, line = titles[0] if len(titles) > 1: add("MEDIUM", "TITLE_MULTIPLE", "<title>", "%d <title> elements; only the first is used" % len(titles), "keep one", titles[1][1]) if len(t) < TITLE_RANGE[0] or len(t) > TITLE_RANGE[1]: add("LOW", "TITLE_LENGTH", "<title>", "title is %d characters (aim for %d-%d): %r" % (len(t), TITLE_RANGE[0], TITLE_RANGE[1], t), "front-load the key words; search results cut around 60 characters", line) desc = val("description") if desc is None or desc == "": add("MEDIUM", "DESCRIPTION_MISSING", "meta description", "no meta description; previews and search snippets pick random page text", "add <meta name=\"description\" content=\"...\"> of 50-160 characters") elif len(desc) < DESC_RANGE[0] or len(desc) > DESC_RANGE[1]: add("LOW", "DESCRIPTION_LENGTH", "meta description", "description is %d characters (aim for %d-%d)" % (len(desc), DESC_RANGE[0], DESC_RANGE[1]), "rewrite to one or two sentences with the key benefit first", first("description").line) if len(metas.get("description", [])) > 1: add("MEDIUM", "DUPLICATE_TAG", "meta description", "%d meta descriptions; the first is used" % len(metas["description"]), "keep one", metas["description"][1].line) # ---- canonical canon = [l for l in p.links if "canonical" in l["rel"]] canon_url = None if not canon: add("MEDIUM", "CANONICAL_MISSING", "link rel=canonical", "no canonical URL; shares with ?utm= or ?ref= parameters count as separate pages", "<link rel=\"canonical\" href=\"https://example.com/clean-path\">") else: if len(set(l["href"] for l in canon)) > 1: add("HIGH", "CANONICAL_MULTIPLE", "link rel=canonical", "%d different canonical URLs; search engines may ignore all of them" % len(canon), "keep exactly one", canon[1]["line"]) canon_url = canon[0]["href"].strip() if not canon_url: add("HIGH", "CANONICAL_EMPTY", "link rel=canonical", "canonical href is empty", "set the full URL", canon[0]["line"]) else: check_abs("canonical", canon_url, canon[0]["line"], "MEDIUM") if not canon[0]["in_head"]: add("MEDIUM", "TAG_OUTSIDE_HEAD", "link rel=canonical", "canonical is in <body>; search engines ignore it there", "move into <head>", canon[0]["line"]) if page_url and urlsplit(canon_url).scheme and urlsplit(canon_url).netloc != urlsplit(page_url).netloc: add("LOW", "CANONICAL_OTHER_HOST", "link rel=canonical", "canonical points to another host (%s)" % urlsplit(canon_url).netloc, "fine for syndicated copies; otherwise use this page's own URL", canon[0]["line"]) # ---- Open Graph core for key, sev, why, fix in ( ("og:title", "MEDIUM", "previews fall back to <title> (often with the site name suffix)", "<meta property=\"og:title\" content=\"...\">"), ("og:description", "LOW", "previews fall back to the meta description or page text", "<meta property=\"og:description\" content=\"...\">"), ("og:type", "LOW", "defaults to website; use article or product where it fits", "<meta property=\"og:type\" content=\"website\">"), ("og:url", "LOW", "shares are not merged onto one canonical URL (like counts split)", "<meta property=\"og:url\" content=\"<canonical URL>\">"), ("og:site_name", "LOW", "LinkedIn and Slack show the bare domain instead of your brand", "<meta property=\"og:site_name\" content=\"Brand\">")): if first(key) is None: add(sev, "OG_MISSING", key, "%s missing: %s" % (key, why), fix) elif not val(key): add("MEDIUM", "EMPTY_CONTENT", key, "%s has an empty content attribute" % key, "fill it or remove the tag", first(key).line) ogt = val("og:title") if ogt and len(ogt) > OG_TITLE_MAX: add("LOW", "OG_TITLE_LONG", "og:title", "og:title is %d characters; previews cut it after ~2 lines" % len(ogt), "keep under ~70-90 characters", first("og:title").line) ogd = val("og:description") if ogd and len(ogd) > OG_DESC_MAX: add("LOW", "OG_DESCRIPTION_LONG", "og:description", "og:description is %d characters; most apps show ~2-3 lines" % len(ogd), "keep under ~200 characters", first("og:description").line) if first("og:url") and val("og:url"): check_abs("og:url", val("og:url"), first("og:url").line) canon_abs = urljoin(page_url, canon_url) if canon_url and page_url else canon_url if canon_abs and urlsplit(canon_abs).scheme and val("og:url").rstrip("/") != canon_abs.rstrip("/"): add("LOW", "CANONICAL_OG_URL_MISMATCH", "og:url", "og:url (%s) differs from canonical (%s)" % (val("og:url"), canon_url), "use the canonical URL in og:url", first("og:url").line) for key, u, ln in (("og:url", val("og:url"), first("og:url").line if first("og:url") else 0), ("canonical", canon_url, canon[0]["line"] if canon else 0)): if u and re.search(r"[?&](utm_[a-z]+|fbclid|gclid|ref|mc_cid)=", u, re.I): add("MEDIUM", "TRACKING_PARAMS", key, "%s carries tracking parameters (%s); every share then counts the campaign" % (key, urlsplit(u).query), "use the clean URL without ?utm_/fbclid/gclid", ln) loc = val("og:locale") if loc and not re.match(r"^[a-z]{2,3}_[A-Z]{2}$", loc): add("LOW", "OG_LOCALE_FORMAT", "og:locale", "og:locale %r should look like en_US (underscore, region in capitals)" % loc, "e.g. en_US, de_DE, pt_BR", first("og:locale").line) ogtype = val("og:type") if ogtype and ogtype not in ("website", "article", "book", "profile", "product", "music.song", "music.album", "music.playlist", "music.radio_station", "video.movie", "video.episode", "video.tv_show", "video.other", "og:product", "product.item", "business.business", "restaurant.restaurant", "place"): add("LOW", "OG_TYPE_UNKNOWN", "og:type", "og:type %r is not a standard type" % ogtype, "website, article, product, profile...", first("og:type").line) # ---- image img_meta = first("og:image") or first("og:image:url") or first("og:image:secure_url") img = (img_meta.content or "").strip() if img_meta and img_meta.content else "" tw_img = val("twitter:image") or val("twitter:image:src") if not img: add("HIGH", "OG_IMAGE_MISSING", "og:image", "no og:image: shares show a plain text link or a random page image", "add a 1200x630 image: <meta property=\"og:image\" content=\"https://.../share.png\">") else: check_abs("og:image", img, img_meta.line) if re.search(r"\.svg(\?|#|$)", img, re.I): add("MEDIUM", "IMAGE_SVG", "og:image", "SVG images are not rendered by Facebook, X, LinkedIn or Slack", "export a PNG or JPEG", img_meta.line) w, h = val("og:image:width"), val("og:image:height") size, source = None, "" if w and h and w.isdigit() and h.isdigit(): size, source = (int(w), int(h)), "declared" elif w or h: add("LOW", "IMAGE_DIMENSIONS_INVALID", "og:image:width/height", "width/height must both be whole numbers (got %r x %r)" % (w, h), "e.g. 1200 and 630", img_meta.line) if root: local = _local_path(img, page_url, root) if local and os.path.isfile(local): real = image_size(local) nbytes = os.path.getsize(local) if real: if size and (size[0], size[1]) != (real[0], real[1]): add("MEDIUM", "IMAGE_DIMENSIONS_WRONG", "og:image:width/height", "declared %dx%d but the file is %dx%d" % (size[0], size[1], real[0], real[1]), "declare the real size", img_meta.line) size, source = (real[0], real[1]), "file %s" % os.path.relpath(local, root) if nbytes > IMG_MAX_BYTES: add("MEDIUM", "IMAGE_TOO_HEAVY", "og:image", "image file is %.1f MB (X rejects over 5 MB, previews time out)" % (nbytes / 1048576.0), "compress to under ~1 MB (JPEG/WebP quality 80)", img_meta.line) elif local: add("MEDIUM", "IMAGE_NOT_FOUND", "og:image", "image not found under --root: %s" % local, "check the path and deploy the file", img_meta.line) if size is None: add("LOW", "IMAGE_DIMENSIONS_MISSING", "og:image:width/height", "no og:image:width/height; Facebook cannot render the image on the very first share", "add og:image:width 1200 and og:image:height 630", img_meta.line) else: iw, ih = size if iw < IMG_MIN[0] or ih < IMG_MIN[1]: add("HIGH", "IMAGE_TOO_SMALL", "og:image", "image is %dx%d (%s); below 200x200 Facebook ignores it" % (iw, ih, source), "use 1200x630", img_meta.line) elif iw < IMG_LARGE[0] or ih < IMG_LARGE[1]: add("MEDIUM", "IMAGE_SMALL", "og:image", "image is %dx%d (%s); large previews need at least 1200x630 (shown small or blurry)" % (iw, ih, source), "use 1200x630 (2400x1260 for sharp retina)", img_meta.line) ratio = iw / float(ih) card = val("twitter:card") or "" if card == "summary_large_image" or not card: if not (1.75 <= ratio <= 2.05): add("LOW", "IMAGE_ASPECT", "og:image", "aspect ratio %.2f:1 will be cropped in large cards (aim for 1.91:1)" % ratio, "1200x630, keep text inside the centre 80%", img_meta.line) if not val("og:image:alt"): add("LOW", "IMAGE_ALT_MISSING", "og:image:alt", "no og:image:alt (screen readers on X/LinkedIn get nothing)", "describe the image in one sentence", img_meta.line) if tw_img: check_abs("twitter:image", tw_img, first("twitter:image").line if first("twitter:image") else 0) # ---- twitter / X card card = val("twitter:card") if card is None: add("LOW" if img else "MEDIUM", "TWITTER_CARD_MISSING", "twitter:card", "no twitter:card; X shows a small summary card at best", "<meta name=\"twitter:card\" content=\"summary_large_image\">") elif card not in TWITTER_CARDS: add("MEDIUM", "TWITTER_CARD_INVALID", "twitter:card", "twitter:card %r is not one of %s" % (card, ", ".join(TWITTER_CARDS)), "use summary_large_image (or summary)", first("twitter:card").line) elif card == "summary_large_image" and not (img or tw_img): add("MEDIUM", "TWITTER_CARD_NO_IMAGE", "twitter:card", "summary_large_image without any image", "add og:image or twitter:image", first("twitter:card").line) for key in ("twitter:site", "twitter:creator"): v = val(key) if v and not re.match(r"^@\w{1,15}$", v): add("LOW", "TWITTER_HANDLE_FORMAT", key, "%s %r should be an @handle" % (key, v), "e.g. @brand", first(key).line) # ---- attribute and placement problems, duplicates, placeholders for m in p.metas: if m.key.startswith("og:") and m.attr == "name": add("LOW", "OG_USES_NAME_ATTR", m.key, "%s uses name= instead of property= (Open Graph spec; some parsers skip it)" % m.key, "<meta property=\"%s\" ...>" % m.key, m.line) if (m.key.startswith(("og:", "twitter:")) or m.key == "description") and not m.in_head: add("MEDIUM", "TAG_OUTSIDE_HEAD", m.key, "%s is inside <body>; Facebook and LinkedIn read only <head>" % m.key, "move into <head>", m.line) if m.content is None and (m.key.startswith(("og:", "twitter:")) or m.key == "description"): add("MEDIUM", "NO_CONTENT_ATTR", m.key, "%s has no content attribute (value=/text= are ignored)" % m.key, "use content=\"...\"", m.line) if m.content and PLACEHOLDER_RE.search(m.content) and (m.key.startswith(("og:", "twitter:")) or m.key == "description"): add("MEDIUM", "PLACEHOLDER_VALUE", m.key, "%s looks like an unrendered template or placeholder: %r" % (m.key, m.content[:60]), "fix the template variable", m.line) for key in SINGLE_OG + ("twitter:card", "twitter:title", "twitter:description"): ms = metas.get(key, []) if len(ms) > 1 and len(set((m.content or "") for m in ms)) > 1: add("MEDIUM", "DUPLICATE_TAG", key, "%d different %s values; apps pick the first or last unpredictably" % (len(ms), key), "keep one (often a theme and an SEO plugin both add tags)", ms[1].line) if titles and titles[0][0] and PLACEHOLDER_RE.search(titles[0][0]): add("MEDIUM", "PLACEHOLDER_VALUE", "<title>", "title looks like a placeholder: %r" % titles[0][0], "fix the template", titles[0][1]) if not p.charset: add("LOW", "CHARSET_MISSING", "meta charset", "no <meta charset>; non-ASCII titles can show as mojibake in previews", "<meta charset=\"utf-8\"> first in <head>") preview = { "title": _cut(ogt or (titles[0][0] if titles else "") or "", OG_TITLE_MAX), "description": _cut(ogd or desc or "", OG_DESC_MAX), "image": img or tw_img or "", "domain": urlsplit(val("og:url") or canon_url or page_url or "").netloc, "card": card or ("summary" if img else "none"), } return f, preview def _cut(text, n): return text if len(text) <= n else text[:n - 3].rstrip() + "..." def _code(text): """Wrap <tags> in backticks so markdown shows them instead of swallowing them as HTML.""" return re.sub(r"(<[^<>]+>)", r"`\1`", text.replace("|", "/")) def _local_path(url, page_url, root): s = urlsplit(url) if s.scheme and page_url and s.netloc and s.netloc != urlsplit(page_url).netloc: return None # image on another host (CDN): cannot check locally path = urlsplit(urljoin(page_url or "https://local.invalid/", url)).path return os.path.join(root, path.lstrip("/")) def run_files(paths, page_url, root, min_sev, ignore): results = [] files = [] for p in paths: if os.path.isdir(p): for dp, _, fns in os.walk(p): files += [os.path.join(dp, fn) for fn in sorted(fns) if fn.lower().endswith((".html", ".htm"))] else: files.append(p) if not files: raise ValueError("no HTML files found") for fp in files: with open(fp, encoding="utf-8", errors="replace") as fh: html = fh.read() if not re.search(r"<(html|head|meta|title|link)\b", html, re.I): raise ValueError("%s does not look like HTML" % fp) fs, prev = analyze(html, page_url if len(files) == 1 else "", root, os.path.basename(fp)) fs = [x for x in fs if SEV_ORDER[x["severity"]] >= SEV_ORDER[min_sev] and x["code"] not in ignore] fs.sort(key=lambda x: (-SEV_ORDER[x["severity"]], x["line"])) results.append((fp, fs, prev)) return results def render_md(results, page_url): allf = [x for _, fs, _ in results for x in fs] c = {k: sum(1 for x in allf if x["severity"] == k) for k in ("HIGH", "MEDIUM", "LOW")} o = ["# Social share meta check", "", "Pages: %d Findings: %d (HIGH %d, MEDIUM %d, LOW %d)%s" % (len(results), len(allf), c["HIGH"], c["MEDIUM"], c["LOW"], (" Page URL: " + page_url) if page_url and len(results) == 1 else "")] for fp, fs, prev in results: o += ["", "## %s" % os.path.basename(fp), "", "Preview as built from the tags (card: %s)" % prev["card"], "", "| Field | Shown |", "|---|---|", "| Domain | %s |" % (prev["domain"] or "(unknown)"), "| Title | %s |" % (prev["title"].replace("|", "/") or "(none)"), "| Description | %s |" % (prev["description"].replace("|", "/") or "(none)"), "| Image | %s |" % (prev["image"] or "(none)"), ""] if not fs: o.append("No findings.") continue o += ["| Sev | Code | Tag | Line | Problem | Fix |", "|---|---|---|---|---|---|"] for x in fs: o.append("| %s | %s | %s | %s | %s | %s |" % (x["severity"], x["code"], _code(x["tag"]), x["line"] or "-", _code(x["problem"]), _code(x["fix"]))) o += ["", "Offline check of the saved HTML only: tags injected by JavaScript after load are invisible to most crawlers too, " "but redirects, robots rules, the live image URL and each platform's preview cache were not tested."] return "\n".join(o) + "\n" # ----------------------------------------------------------------------------- self-test GOOD = """<!doctype html><html lang="en"><head><meta charset="utf-8"> <title>Trail Running Shoes for Wet Rocks | Peakline</title> <meta name="description" content="Grippy, light trail shoes tested on wet granite and mud. Compare fit, drop and sole wear, then pick your size."> <link rel="canonical" href="https://shop.example.com/shoes/trail-grip"> <meta property="og:type" content="product"><meta property="og:site_name" content="Peakline"> <meta property="og:title" content="Trail Running Shoes for Wet Rocks"> <meta property="og:description" content="Grippy, light trail shoes tested on wet granite and mud."> <meta property="og:url" content="https://shop.example.com/shoes/trail-grip"> <meta property="og:image" content="https://shop.example.com/img/trail-grip-share.jpg"> <meta property="og:image:width" content="1200"><meta property="og:image:height" content="630"> <meta property="og:image:alt" content="Blue trail shoe on a wet granite slab"> <meta property="og:locale" content="en_US"> <meta name="twitter:card" content="summary_large_image"><meta name="twitter:site" content="@peakline"> </head><body><h1>Trail Grip</h1></body></html>""" def self_test(): import tempfile cases = [] def codes(html, url="https://shop.example.com/shoes/trail-grip", root=None): return [x["code"] for x in analyze(html, url, root)[0]] def case(name, fn): try: ok, err = bool(fn()), "" except Exception as e: # noqa ok, err = False, repr(e) cases.append((name, ok, err)) def sub(a, b): assert a in GOOD, a return GOOD.replace(a, b) case("good page is clean", lambda: codes(GOOD) == []) case("missing title", lambda: "TITLE_MISSING" in codes(sub("<title>Trail Running Shoes for Wet Rocks | Peakline</title>", ""))) case("two titles", lambda: "TITLE_MULTIPLE" in codes(sub("</head>", "<title>Other</title></head>"))) case("title too long", lambda: "TITLE_LENGTH" in codes(sub("Trail Running Shoes for Wet Rocks | Peakline", "x" * 75))) case("description missing", lambda: "DESCRIPTION_MISSING" in codes(re.sub(r'<meta name="description"[^>]*>', "", GOOD))) case("description short", lambda: "DESCRIPTION_LENGTH" in codes(re.sub(r'(<meta name="description" content=")[^"]*', r"\1Shoes.", GOOD))) case("canonical missing", lambda: "CANONICAL_MISSING" in codes(re.sub(r'<link rel="canonical"[^>]*>', "", GOOD))) case("canonical relative", lambda: "RELATIVE_URL" in codes(sub('href="https://shop.example.com/shoes/trail-grip"', 'href="/shoes/trail-grip"'))) case("two canonicals", lambda: "CANONICAL_MULTIPLE" in codes(sub("</head>", '<link rel="canonical" href="https://shop.example.com/x"></head>'))) case("canonical vs og:url mismatch", lambda: "CANONICAL_OG_URL_MISMATCH" in codes(sub('og:url" content="https://shop.example.com/shoes/trail-grip"', 'og:url" content="https://shop.example.com/shoes/trail-grip?utm_source=x"'))) case("trailing slash difference ignored", lambda: "CANONICAL_OG_URL_MISMATCH" not in codes(sub('og:url" content="https://shop.example.com/shoes/trail-grip"', 'og:url" content="https://shop.example.com/shoes/trail-grip/"'))) case("og:image missing HIGH", lambda: "OG_IMAGE_MISSING" in codes(re.sub(r'<meta property="og:image[^>]*>', "", GOOD))) case("og:image relative HIGH", lambda: [x["severity"] for x in analyze(sub('content="https://shop.example.com/img/trail-grip-share.jpg"', 'content="/img/trail-grip-share.jpg"'), "https://shop.example.com/p")[0] if x["code"] == "RELATIVE_URL"] == ["HIGH"]) case("og:image http", lambda: "HTTP_URL" in codes(sub("https://shop.example.com/img/", "http://shop.example.com/img/"))) case("og:image svg", lambda: "IMAGE_SVG" in codes(sub("trail-grip-share.jpg", "logo.svg"))) case("image dims missing", lambda: "IMAGE_DIMENSIONS_MISSING" in codes(re.sub(r'<meta property="og:image:(width|height)"[^>]*>', "", GOOD))) case("image too small HIGH", lambda: "IMAGE_TOO_SMALL" in codes(sub('content="1200"', 'content="150"').replace('content="630"', 'content="150"'))) case("image small MEDIUM", lambda: "IMAGE_SMALL" in codes(sub('content="1200"', 'content="600"').replace('content="630"', 'content="315"'))) case("image square aspect for large card", lambda: "IMAGE_ASPECT" in codes(sub('content="630"', 'content="1200"'))) case("summary card allows square", lambda: "IMAGE_ASPECT" not in codes(sub('content="630"', 'content="1200"').replace("summary_large_image", "summary"))) case("image alt missing", lambda: "IMAGE_ALT_MISSING" in codes(re.sub(r'<meta property="og:image:alt"[^>]*>', "", GOOD))) case("dims not numbers", lambda: "IMAGE_DIMENSIONS_INVALID" in codes(sub('content="1200"', 'content="1200px"'))) case("og:title missing", lambda: "OG_MISSING" in codes(re.sub(r'<meta property="og:title"[^>]*>', "", GOOD))) case("empty og:description", lambda: "EMPTY_CONTENT" in codes(re.sub(r'(<meta property="og:description" content=")[^"]*', r"\1", GOOD))) case("og:title too long", lambda: "OG_TITLE_LONG" in codes(sub('og:title" content="Trail Running Shoes for Wet Rocks"', 'og:title" content="' + "y" * 120 + '"'))) case("tracking params in og:url", lambda: "TRACKING_PARAMS" in codes(sub('og:url" content="https://shop.example.com/shoes/trail-grip"', 'og:url" content="https://shop.example.com/shoes/trail-grip?utm_source=nl"'))) case("relative canonical compared after resolving", lambda: "CANONICAL_OG_URL_MISMATCH" in codes(sub('href="https://shop.example.com/shoes/trail-grip"', 'href="/shoes/other"'))) case("preview cut with ellipsis", lambda: _cut("a" * 300, 200).endswith("...") and len(_cut("a" * 300, 200)) <= 200) case("og:locale format", lambda: "OG_LOCALE_FORMAT" in codes(sub("en_US", "en-us"))) case("og:type unknown", lambda: "OG_TYPE_UNKNOWN" in codes(sub('og:type" content="product"', 'og:type" content="shoe"'))) case("og with name attr", lambda: "OG_USES_NAME_ATTR" in codes(sub('property="og:title"', 'name="og:title"'))) case("twitter card missing", lambda: "TWITTER_CARD_MISSING" in codes(re.sub(r'<meta name="twitter:card"[^>]*>', "", GOOD))) case("twitter card invalid", lambda: "TWITTER_CARD_INVALID" in codes(sub("summary_large_image", "large"))) case("twitter handle format", lambda: "TWITTER_HANDLE_FORMAT" in codes(sub("@peakline", "https://x.com/peakline"))) case("large card without any image", lambda: "TWITTER_CARD_NO_IMAGE" in codes(re.sub(r'<meta property="og:image[^>]*>', "", GOOD))) case("tag in body", lambda: "TAG_OUTSIDE_HEAD" in codes(sub("<h1>Trail Grip</h1>", '<h1>T</h1><meta property="og:video" content="https://a/v.mp4">'))) case("implied body by div", lambda: "TAG_OUTSIDE_HEAD" in codes(GOOD.replace("</head><body>", "<div>x</div>").replace('<meta name="twitter:site" content="@peakline">', "").replace("<h1>", '<meta name="twitter:site" content="@peakline"><h1>'))) case("placeholder value", lambda: "PLACEHOLDER_VALUE" in codes(sub('og:title" content="Trail Running Shoes for Wet Rocks"', 'og:title" content="{{ product.name }}"'))) case("undefined value", lambda: "PLACEHOLDER_VALUE" in codes(sub("Blue trail shoe on a wet granite slab", "undefined"))) case("duplicate og:title different values", lambda: "DUPLICATE_TAG" in codes(sub("</head>", '<meta property="og:title" content="Peakline Shop"></head>'))) case("duplicate same value tolerated", lambda: "DUPLICATE_TAG" not in codes(sub("</head>", '<meta property="og:title" content="Trail Running Shoes for Wet Rocks"></head>'))) case("no content attribute", lambda: "NO_CONTENT_ATTR" in codes(sub('<meta property="og:site_name" content="Peakline">', '<meta property="og:site_name" value="Peakline">'))) case("charset missing", lambda: "CHARSET_MISSING" in codes(sub('<meta charset="utf-8">', ""))) case("html entities decoded in title", lambda: analyze(re.sub(r'<meta property="og:title"[^>]*>', "", sub("Wet Rocks | Peakline", "Wet Rocks & Mud")))[1]["title"] == "Trail Running Shoes for Wet Rocks & Mud") case("preview uses og values", lambda: analyze(GOOD, "https://shop.example.com/shoes/trail-grip")[1]["domain"] == "shop.example.com") tmp = tempfile.mkdtemp() os.makedirs(os.path.join(tmp, "img")) png = b"\x89PNG\r\n\x1a\n" + b"\x00\x00\x00\x0dIHDR" + struct.pack(">II", 800, 418) + b"\x08\x02\x00\x00\x00" with open(os.path.join(tmp, "img", "trail-grip-share.jpg"), "wb") as fh: fh.write(png) case("--root reads real image size", lambda: "IMAGE_DIMENSIONS_WRONG" in codes(GOOD, root=tmp) and "IMAGE_SMALL" in codes(GOOD, root=tmp)) case("--root image not found", lambda: "IMAGE_NOT_FOUND" in codes(sub("trail-grip-share.jpg", "nope.png"), root=tmp)) case("png size parser", lambda: image_size(os.path.join(tmp, "img", "trail-grip-share.jpg"))[:2] == (800, 418)) gif = b"GIF89a" + struct.pack("<HH", 1200, 630) + b"\x00" * 20 jpg = (b"\xff\xd8" + b"\xff\xe0" + struct.pack(">H", 16) + b"JFIF\x00" + b"\x00" * 9 + b"\xff\xc0" + struct.pack(">H", 17) + b"\x08" + struct.pack(">HH", 630, 1200) + b"\x03" + b"\x00" * 9) webp = b"RIFF" + b"\x00" * 4 + b"WEBPVP8X" + b"\x0a\x00\x00\x00" + b"\x00" * 4 + (1199).to_bytes(3, "little") + (629).to_bytes(3, "little") for fn, data in (("a.gif", gif), ("a.jpg", jpg), ("a.webp", webp)): with open(os.path.join(tmp, fn), "wb") as fh: fh.write(data) case("gif size parser", lambda: image_size(os.path.join(tmp, "a.gif"))[:2] == (1200, 630)) case("jpeg size parser", lambda: image_size(os.path.join(tmp, "a.jpg"))[:2] == (1200, 630)) case("webp size parser", lambda: image_size(os.path.join(tmp, "a.webp"))[:2] == (1200, 630)) case("cdn image skipped for --root", lambda: _local_path("https://cdn.other.net/a.png", "https://shop.example.com/", tmp) is None) case("non-HTML file rejected", lambda: _rejects(tmp)) case("markdown render", lambda: "Preview as built" in render_md([("p.html", [], analyze(GOOD)[1])], "")) passed = sum(1 for _, ok, _ in cases if ok) for name, ok, err in cases: print(("PASS " if ok else "FAIL ") + name + ((" " + err) if err else "")) print("%d/%d passed" % (passed, len(cases))) return 0 if passed == len(cases) else 1 def _rejects(tmp): fp = os.path.join(tmp, "notes.md") with open(fp, "w") as fh: fh.write("# Notes\nuse <b>bold</b>\n") try: run_files([fp], "", None, "LOW", set()) except ValueError: return True return False def main(argv=None): ap = argparse.ArgumentParser(description="Check Open Graph / X card / canonical meta tags in saved HTML (offline).") ap.add_argument("paths", nargs="*", help="HTML files or folders") ap.add_argument("--url", default="", help="public URL of the page (single file)") ap.add_argument("--root", default=None, help="local folder mapped to the site root, to read og:image files") ap.add_argument("--min-severity", default="LOW", choices=["LOW", "MEDIUM", "HIGH"]) ap.add_argument("--ignore", default="", help="comma-separated finding codes to skip") ap.add_argument("--json", action="store_true") ap.add_argument("--self-test", action="store_true") a = ap.parse_args(argv) if a.self_test: return self_test() if not a.paths: ap.error("give HTML files/folders or --self-test") ignore = {c.strip() for c in a.ignore.split(",") if c.strip()} try: results = run_files(a.paths, a.url, a.root, a.min_severity, ignore) except (OSError, ValueError) as e: print("error: %s" % e, file=sys.stderr) return 2 if a.json: print(json.dumps([{"file": fp, "preview": prev, "findings": fs} for fp, fs, prev in results], indent=2)) else: sys.stdout.write(render_md(results, a.url)) return 1 if any(x["severity"] == "HIGH" for _, fs, _ in results for x in fs) else 0 if __name__ == "__main__": sys.exit(main())
Create a native 15-second, vertical 9:16 cinematic horror short. No reference image. No text, no captions, no logos. Clear simple story, every shot readable without sound. CORE RULES One adult woman, one ghost figure in a white sheet, one house: the front porch and the front hallway. Nobody else appears. The ghost never shows a face, hands or feet. Calm, slow, building dread, then a final scare. CHARACTER Lena, 27 years old, clearly adult, long dark wavy hair, pale skin, dark red lipstick, natural beautiful face, fitted black long-sleeve top, black high-waist jeans, black ankle boots. She holds a round black ceramic candy bowl full of orange and black wrapped candy. FACE Natural skin texture, real expressions: warm smile, then polite confusion, then slow fear, then pure terror. Mouth opens only moderately, only upper teeth show. Eyes stay sharp and alive. Head turns under 45 degrees. GHOST An adult-height figure fully covered by a plain old white bedsheet with two small black eye holes. It holds a small black trick-or-treat bowl through the sheet, the hands are never visible. It stands completely still and silent. The bottom hem of the sheet floats about 3 cm above the porch boards, with only darkness under it. VOICE Lena: soft, friendly, natural American English, then a shaky whisper. CAMERA Real cinema camera, slow controlled moves, shallow depth of field, gentle slow push-ins. Shots are clean and steady. LOOK Dark moody cinematic Halloween night: deep teal and blue night tones outside, warm orange light from the porch lamp and a carved pumpkin, warm yellow wall sconce inside. Soft film grain, rich contrast, deep but readable shadows. Faces always clearly lit. SETTING A classic American suburban house on Halloween night. Front porch: white wooden railing, old wooden boards with fallen leaves, a glowing carved jack-o-lantern by the door, a warm porch lamp. Behind: a quiet foggy street, bare trees, a full moon, distant houses with lit windows. Inside: a narrow front hallway with dark wood floor, a staircase on the left, a brass wall sconce, a small side table. MOTION Natural human weight and timing. The ghost is completely motionless except where stated. The sheet only moves when the wind moves it. DEFECT PREVENTION Hands: Lena holds the candy bowl with both hands, LEFT hand under it, RIGHT hand free only to drop the candy and to slam the door. Five fingers per hand. Face: her face, hair and lipstick stay identical in every shot. Ghost: never shows hands, feet, face or legs. Same sheet, same eye holes in every shot. Objects: one candy bowl (hers), one small black bowl (ghost), one candy, one pumpkin, one door. Nothing duplicates or vanishes except the ghost disappearing as stated. Continuity: same outfit, same night, same porch, same hallway in every shot. Physics: candy falls with real gravity. The empty sheet collapses softly like real fabric. STORYBOARD 00:00.0-00:02.0 Shot 1, wide from inside the hallway toward the front door. The doorbell rings. Lena walks to the door with the candy bowl and opens it, smiling. Through the open door, the ghost stands on the porch under the orange porch lamp, motionless, bowl held out. 00:02.0-00:05.0 Shot 2, over Lena's shoulder onto the ghost. She smiles: "Aww, cute costume!" She drops one orange candy into the ghost's bowl. The ghost does not move or say anything. 00:05.0-00:07.5 Shot 3, close-up on Lena. Her smile slowly fades. She tilts her head: "Where are your parents?" Silence. Only wind. 00:07.5-00:09.5 Shot 4, slow tilt down the sheet to the porch boards: the hem floats above the floor, nothing underneath, no feet, no shadow. Leaves blow under it. 00:09.5-00:11.0 Shot 5, wide on the porch. A gust of wind. The sheet collapses flat onto the porch boards, completely empty. The black bowl drops and the candy rolls out. 00:11.0-00:13.0 Shot 6, inside. Lena steps back and slams the door shut with her RIGHT hand, then leans her back against it, breathing fast, eyes closed, clutching the candy bowl. 00:13.0-00:15.0 Shot 7, wide down the hallway from behind Lena. She opens her eyes, still facing the camera. Far behind her, at the end of the dark hallway under the brass sconce, the same white sheet ghost stands perfectly still, facing her. She does not see it. The sconce flickers once. SOUND Doorbell, creaking door, wind and dry leaves, candy clinking into the bowl, a long silence, soft fabric falling, the door slamming, her fast breathing, one low deep hum and a light flicker buzz at the end. FINAL FEEL A clean, clear, beautifully shot Halloween horror short with a chilling final reveal. Not polished influencer content.
Create a design using our brand logo using hi-viz and black vinyl/print. Do this on Hi-visibility running tops.
Vertical 9:16 candid fashion portrait of a beautiful girl in the picture, with long, messy, loose hair. She spins rapidly while looking back at the camera, arms spread wide and hair flying. SLOW SHUTTER SPEED 1/8–1/15 sec, extreme realistic motion blur, ghost trails on arms and hair, blurred body, recognizable face, horizontal background streaks, slight camera shake, double-exposure effect, heavy 35mm film grain, dreamy, moody, underexposed, photorealistic. No CGI, no frozen motion, no sharp arms or hair.
{ "prompt": { "title": "Personalized LEGO Minifigure Collectible Generator", "concept": "Transform the person in the reference image into a premium, highly detailed, classic LEGO minifigure collectible. The result must look like a professionally manufactured physical LEGO toy photographed in a high-end product photography studio.", "reference_image_analysis": { "instruction": "Analyze the reference photograph before designing the minifigure.", "identify_and_preserve": [ "Distinctive facial characteristics", "Face shape and proportions", "Hair color, hairstyle, and hair volume", "Eyebrows and characteristic expression", "Glasses and eyewear", "Facial hair, beard, and moustache", "Original clothing and dominant colors", "Logos, typography, and recognizable clothing graphics", "Jewelry, watches, bags, and personal accessories", "Other distinctive visual characteristics" ], "identity_priority": "The resulting minifigure should be immediately recognizable as the person in the reference image, despite the simplified LEGO facial design." }, "character_construction": { "design_language": "Authentic classic LEGO minifigure construction with premium collectible detailing.", "head": { "shape": "Classic cylindrical LEGO minifigure head", "material": "Glossy injection-molded plastic", "color": "Traditional LEGO yellow or appropriate LEGO skin-tone color", "face": "Printed LEGO facial graphics", "eyes": "Classic expressive LEGO eyes with black pupils and white highlights", "eyebrows": "Printed eyebrows matching the subject", "expression": "Friendly, confident, natural expression", "facial_hair": "Precisely printed stubble, beard, or moustache when present" }, "hair": { "construction": "Separate molded LEGO hairpiece", "material": "Glossy ABS plastic", "style": "Reproduce the reference hairstyle using recognizable molded hair geometry", "details": "Individual molded hair sections, realistic plastic reflections, accurate hair color" }, "eyewear": { "instruction": "Reproduce glasses and sunglasses as separate miniature LEGO-compatible accessories when present.", "style": "Accurate frame shape, color, and proportions." }, "torso": { "shape": "Classic LEGO minifigure torso", "clothing": "Reproduce the original outfit using clean printed graphics.", "graphics": "Preserve recognizable logos, lettering, color combinations, pockets, collars, and clothing details.", "texture": "Smooth plastic with printed designs. Never use realistic fabric textures.", "finish": "Premium glossy molded plastic." }, "arms": { "shape": "Classic cylindrical LEGO arms", "proportions": "Authentic minifigure dimensions", "color": "Match the reference clothing" }, "hands": { "shape": "Traditional C-shaped LEGO hands", "color": "Match the minifigure head color" }, "legs": { "shape": "Classic rigid LEGO minifigure legs", "proportions": "Short, blocky, connected LEGO legs", "details": "Printed trousers, shoes, and other recognizable clothing details where appropriate" }, "accessories": { "instruction": "Recreate recognizable personal accessories as miniature molded LEGO elements.", "examples": [ "Glasses", "Watches", "Headphones", "Backpacks", "Bags", "Hats", "Jewelry", "Professional equipment", "Personal objects" ], "rule": "Only include accessories supported by the reference photograph." } }, "material_and_rendering": { "material": "High-quality injection-molded ABS plastic", "surface": "Smooth, polished, glossy plastic", "reflections": "Subtle controlled studio reflections", "edges": "Precise molded edges and authentic LEGO geometry", "printing": "Sharp, clean, high-resolution printed graphics", "realism": "Photorealistic physical toy rendering", "quality": "Premium collectible product visualization" }, "composition": { "subject_count": 1, "position": "Precisely centered in the frame", "pose": "Standing upright in a natural neutral minifigure pose", "orientation": "Front-facing with a subtle three-quarter angle", "framing": "Complete character visible from hair to feet", "scale": "Character occupies approximately 75 to 85 percent of the image height", "symmetry": "Balanced composition with equal visual breathing room", "camera": "Professional product photography, slightly elevated three-quarter perspective" }, "background": { "type": "Pure white seamless studio background", "color": "#FFFFFF", "environment": "No scenery, no diorama, no LEGO bricks, no furniture, no props", "shadows": "Very subtle natural contact shadow beneath the character", "distractions": "Absolutely none" }, "lighting": { "style": "Premium commercial studio lighting", "key_light": "Large softbox positioned at 45 degrees", "fill_light": "Soft frontal fill light", "rim_light": "Subtle highlights around the hair and shoulders", "shadows": "Soft realistic shadows", "exposure": "Bright, balanced, clean exposure" }, "miniature_effect": { "concept": "The character must look like a real, tiny physical collectible toy photographed using professional macro photography.", "camera_style": "Macro product photography", "lens": "90mm to 105mm macro lens aesthetic", "depth_of_field": "Moderately shallow depth of field, keeping the entire minifigure sharp.", "focus": "Sharp focus on the face, hair, torso, and clothing details.", "perspective": "Natural miniature toy photography perspective", "scale_illusion": "Subtle optical characteristics that communicate physical miniature scale without distorting the character.", "background_blur": "Not applicable to the pure white seamless background." }, "visual_consistency": { "priority_1": "Authentic LEGO minifigure anatomy", "priority_2": "Recognizable personal identity", "priority_3": "Accurate clothing and accessories", "priority_4": "Premium glossy plastic materials", "priority_5": "Consistent studio product photography", "rule": "Never convert the character into a realistic human, action figure, Funko Pop, or generic cartoon character." }, "negative_prompt": [ "Realistic human anatomy", "Human skin texture", "Photorealistic human face", "Funko Pop proportions", "Action figure anatomy", "Soft organic body shapes", "Long human-like legs", "Realistic fabric", "Cloth wrinkles", "Oversized hands", "Deformed LEGO parts", "Missing accessories", "Incorrect hairstyle", "Unrecognizable facial characteristics", "Extra limbs", "Multiple characters", "Background scenery", "LEGO diorama", "Colored background", "Text outside the character", "Watermarks", "Packaging", "Display stands", "Cropped feet", "Cropped hair" ], "output_settings": { "format": "Photorealistic 3D render", "aspect_ratio": "2:3", "resolution": "High resolution", "background": "Pure white", "subject": "One complete centered LEGO minifigure", "presentation": "Premium collectible studio product photograph" } } }
A risograph print poster of hot air balloons drifting over the fairy chimneys of Cappadocia at sunrise, vertical portrait 3:4. Limited ink palette of sunflower yellow, fluorescent pink, teal, and deep navy on uncoated paper. The whole sky is flat sunflower yellow. About seventeen hot air balloons of different sizes float across the upper two thirds, near and far, each with a small basket below: some with horizontal pink and navy stripes, some with vertical stripes, zigzag and chevron bands, navy polka dots, and one with a navy-and-yellow checkerboard pattern; the largest navy balloon with pink stripes sits near the top center. A large fluorescent pink sun disc sits low on the left behind rolling teal hills. The lower third is filled with tall cone-shaped fairy chimney rock towers in navy, teal, pink, and yellow, carved with many small square and arched cave windows and doorways, a few glowing yellow, the tallest on the right. Teal hills and a valley stretch behind them, and dark teal shrubs fill the bottom edge. Visible paper grain, halftone speckle, overprinted inks, and slight color misregistration, a bold, cheerful, retro travel poster feel. No text, no logos.
Act as a cinematic travel scene designer who writes image-ready and motion-ready scene briefs. Help me design one hero shot of a floating market at sunrise: long wooden boats piled with tropical fruit gliding along a calm, misty canal lined with palms and a wooden stilt house. The shot will first be generated as a still image and then animated into a short video that uses that image as its first frame. Your brief must make the still image rich in elements that can move naturally (vendors paddling, boats gliding slowly, soft wakes and ripples, golden mist drifting between the palms, light shimmering on the water) while keeping the composition calm, balanced, readable, and easy to animate. My starting idea: ${idea:a quiet floating market at sunrise, with women vendors in conical straw hats paddling wooden boats full of fruit along a misty tropical canal} My starting choices: - Boats: ${boats:five long, narrow wooden boats, each with one vendor, three in the foreground and two smaller ones further back, plus one tiny boat far away in the mist} - Cargo: ${cargo:bananas, pineapples, green mangoes, limes, pomelos, coconuts, and pink dragon fruit piled high} - Vendors: ${vendors:women in conical straw hats and long-sleeve patterned shirts, holding wooden paddles} - Canal: ${canal:a calm brown-green canal running straight away from the camera into the distance} - Left bank: ${left_bank:a weathered wooden stilt house with a rusty corrugated tin roof and a balcony full of potted plants} - Banks and trees: ${trees:tall coconut palms and dense tropical greenery on both banks, fading into the mist} - Time and light: ${time:just after sunrise, soft golden backlight from the top right, warm haze} - Visual style: ${style:photoreal travel and documentary photography, natural colors} - Mood words: ${mood:peaceful, warm, lively but unhurried, timeless} First ask me, in one short message, for anything missing: the camera height (water level, eye level from a boat, or a little above), how many boats and vendors I want and how close the nearest ones are, which fruits must be visible, how thick the mist should be, whether the boats should glide toward the camera or across the frame in the video, whether more boats may appear in the distance as the shot settles, and anything to avoid (signs, text, logos, motors, modern clothing, brand packaging, recognizable faces, or copying a specific real market, photograph, or named landmark). Then produce the brief with these sections: 1. **Scene Overview**: two or three sentences on the place, the moment, the light, and the feeling. Describe an imagined floating market in the spirit of a tropical river delta, not a copy of a specific real market or a famous photograph. 2. **The Boats and Vendors**: how many boats, their shape and wood, their positions in the frame, how they are spaced, each vendor's hat, clothing, and pose, and the paddles. 3. **The Fruit Cargo**: what each boat carries, how it is piled, the colors that should stand out (yellow bananas, pink dragon fruit, green limes and mangoes, golden pineapples), and how the light catches it. 4. **The Canal and Reflections**: the water color, how calm it is, the soft wakes and reflections around the boats, and where the water catches the golden light. 5. **Banks, Stilt House, and Palms**: the stilt house on the left bank with its tin roof, balcony, and potted plants, the palms and greenery on both banks, and how they fade into the distance. 6. **Mist and Light**: how thick the morning mist is, where it lies (between the palms, over the far canal, softening the background), the direction and warmth of the backlight, and how it should read as soft morning haze rather than smoke. 7. **Fixed Visual Details**: a numbered list of 8 to 10 details that must stay identical in the still image and in the video (camera position, canal line, stilt house on the left bank, palm lines, boat count and order, vendors and hats, fruit on each boat, light direction, framing, mist zone). 8. **Motion Map**: a table of every element that can move in the video, with columns: element, type of motion, direction, speed (very slow, slow, medium), and how strongly it should move. Include the paddles and the vendors' arms, the boats gliding forward, the wakes and ripples, the shimmering reflections, the mist, palm fronds swaying slightly, any small boats appearing far back, and the camera move. Keep total motion subtle and physically plausible. 9. **Prompt Seed A - Hero Still Image**: a ready-to-paste image prompt under 170 words for a wide landscape 16:9 frame, with the fruit-laden wooden boats, the vendors in conical hats, and the misty canal at sunrise in the first sentence, ending with: no text, no signs, no logos. 10. **Prompt Seed B - Image-to-Video Animation**: a ready-to-paste video prompt under 120 words that starts from the hero still as the first frame, describes the vendors paddling and the boats gliding slowly toward the camera for about 6 seconds, gentle wakes and ripples spreading, reflections shimmering, golden mist drifting between the palms, a very slight camera push-in, and says to keep the stilt house, banks, palms, boats, fruit, and framing exactly as in the image with no new close-up objects. Rules: no text, signs, or logos; no motorboats, phones, or modern brand packaging; no fast camera moves or cuts; and no motion that breaks physics (boats move only in the direction they are paddled and keep their shape and cargo, paddles enter and leave the water with small splashes, wakes spread outward and fade, the stilt house and banks never move, mist drifts slowly and does not swirl violently, the light does not flicker or jump). Use short paragraphs and lists.
Start from the step 2 image "Floating Market Boats Laden with Tropical Fruit on a Misty Canal at Sunrise" as the exact first frame, and animate it into a calm ${duration:6}-second cinematic shot. Keep the weathered stilt house with its rusty tin roof and potted plants on the left bank, the coconut palms and tropical greenery on both banks, the brown-green canal, the wooden boats with their vendors in conical straw hats, the bananas, pineapples, limes, mangoes, and dragon fruit on each boat, the golden backlight from the top right, and the composition exactly as in the image. The vendors paddle steadily with wooden paddles, and the boats glide slowly forward toward the camera, keeping roughly their formation. Gentle ripples and wakes spread across the water around each boat, and the reflections shimmer. As the scene settles, a few more small boats become visible further back in the misty canal. Golden morning mist drifts slowly between the palms, while the camera makes a very slight, steady push-in. The shot ends calm in warm sunrise light. Natural, realistic motion, no cuts, no text, no signs. Soft sound of paddles dipping into the water, quiet lapping of small waves, and distant birdsong.
Inputs: - Image 1: your character sheet (the image to fix) - Image 2: a close-up skin texture reference - Image 3: a hair texture reference (light or dark, matching your character) Keep <<<image_1>>> exactly as it is: same person, same face shape and features, same expression, same hairstyle and hair shape, same hair color, same skin tone, same makeup, same wrinkles, freckles, moles, scars and facial hair, same clothing and accessories, same pose, composition, layout, background and framing. Change only the surface texture: - Skin: apply the micro-texture from <<<image_2>>> — fine natural skin lines, pores and soft realistic surface. Do not copy its color or its glossy shine. - Hair: apply the strand structure from <<<image_3>>> — fine individual strands, soft natural flyaways. Do not copy its color. Balance the contrast to a natural photographic level: if image 1 looks too harsh or blotchy, soften it; if it looks flat or washed out, add depth. Aim for a well-balanced realistic photo — rich but not crushed shadows, clean highlights, smooth even tonal transitions, natural shading with real volume. No retouching, no beautifying, no plastic look.
The video begins from the frame defined by the attached painting and preserves its exact composition, subjects, colors, lighting, and arrangement as a still three-dimensional space. No person, animal, object, water, foliage, cloud, flame, or any other painted element moves, animates, or changes state. The entire scene remains completely frozen, as if the painting has simply become a solid, motionless diorama. The camera performs continuous cinematic 3D travel through this frozen scene: it slowly pushes forward, gently orbits, and drifts past the main subjects and spatial layers, revealing depth, parallax, and volumetric form while never altering or animating any content inside the painting. Only ambient spatial presence accompanies the movement; there is no dialogue, narration, music, or sound effects from any element within the painting.
Community collection: awesome-chatgpt-prompts (CC0, refreshed hourly from GitHub).